User manual DAEWOO VRC440

[. . . ] VCR User's Guide Please read these instructions before operating this product for the first time. Changing Entertainment. Again. VRC440 15763820 (VRC440)(E) 01 CVR 1 5/25/01, 12:51 PM Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. [. . . ] INPUT Selects between the VCR's line input or tuner. Line input refers to the signal coming from the component connected to the AUDIO/VIDEO IN jacks on the back (L1) or front (L2). MENU Brings up the main MENU on the TV screen. Numbers (0 through 9 and 100) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing 100, 1 ­ ­ appears on the screen. again to return to recording TV/VCR MENU CLEAR DISPLAY MUTE ENTER VOLUME CH/TRK SLOW/SHT (Play) Plays a tape. Press to return to playback when VCR is paused. 22 Chapter 3 15763820 (VRC440)(E) 06 Rmot 22 5/25/01, 12:52 PM Using the Remote Control REC/OTR Starts VCR recording. (Reverse) Rewinds the tape when the VCR is stopped. Searches backward through a tape during playback. SLOW/SHT up and down Starts slow motion during playback. Press to increase or decrease the slow-motion speed. SPEED Selects a recording speed (SP or EP). (Stop) Stops the current VCR function such as record, playback, rewind, or fast forward. TV/VCR Switches the picture signal so that it either comes from the VCR or cable/antenna system. TV Function Buttons CH/TRK Selects next higher or lower channel in the TV's channel memory. CLEAR Removes menus or status displays from the screen. ENTER Used in conjunction with compatible TV menus DISPLAY Shows the TV's status displays on the TV screen. INPUT Selects between the TV's input channel or tuner. Press to see the VCR signal if you connected your VCR using the AUDIO/VIDEO jacks. Numbers (0 through 9, 100) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing 100, 1 ­ ­ appears on the screen. VOLUME Up and Down Raises and lowers sound of TV. Using the INPUT Button Use the INPUT button to toggle through the available Video Line Input sources (L1 or L2) and regular broadcasting signals. Video Line Input allows you to view the image from a connected device (like a camcorder) through the VCR. [. . . ] AUDIO and VIDEO OUT jacks Sends signals from the VCR to another component, like a TV or another VCR, when the other component is connected to these jacks. 3/4 switch Determines the channel to which the TV must be tuned in order to see the VCR's picture. Not used when connecting the VCR to the TV using A/V cables. RF OUT jack Passes the VCR's signal to a TV using the supplied RF cable. Chapter 5 39 15763820 (VRC440)(E) 08 Othr 39 5/25/01, 12:52 PM Other Information Finding the TV's Video Line Input Note: If the VCR's remote control cannot operate your brand of TV, then you must find the TV's Video Line Input using the TV's remote control or channel up/down buttons. TV Button EJECT POWER You need to tune your TV to the video line input if you are using the VCR's Audio/Video (A/V) OUT jacks to connect to the TV's A/V input jacks. [. . . ]