User manual DAHON ALFINE CS-S500 TECHNICAL SERVICE INSTRUCTIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DAHON ALFINE CS-S500. We hope that this DAHON ALFINE CS-S500 user guide will be useful to you.
Lastmanuals help download the user guide DAHON ALFINE CS-S500.
Manual abstract: user guide DAHON ALFINE CS-S500TECHNICAL SERVICE INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] General Safety Information
WARNING
To avoid serious injuries:
When installing the hub to the frame, be sure to install the correct non-turn washers to the left and right sides, and securely tighten the hub nuts to the specified torques. If the non-turn washers are installed to one side only, or if the hub nuts are not tightened sufficiently, the non-turn washer may fall out, which could cause the hub axle to rotate and the cassette joint to turn. [. . . ] If it is not fully installed, noise may be generated.
Chain guard
Right hand dust cap B
You can shift gears while pedaling, but on rare occasions the pawls and ratchet inside the hub may produce some noise afterwards as part of normal gear shifting operation. The CJ-8S20 cassette joint should only be used with sprockets from 16T to 23T. If using a chain tensioner, use the special CS-S500 18T or 20T sprocket with chain guard. Do not use any other types of sprockets, otherwise the chain may come off the sprockets. If the wheel becomes stiff and difficult to turn, you should lubricate it with grease. You should periodically wash the sprockets in a neutral detergent and then lubricate them again. In addition, cleaning the chain with neutral detergent and lubricating it can be a effective way of extending the useful life of the sprockets and the chain. If the chain keeps coming off the sprockets during use, replace the sprockets and the chain. Parts are not guaranteed against natural wear or deterioration resulting from normal use. For maximum performance we highly recommend Shimano lubricants and maintenance products. For any questions regarding methods of handling or adjustment, please contact the place of purchase.
Guard plate Driver
Right side of the hub body
Cassette joint Groove of dropout
Chain guard
on the 2. Install the CS-S500 sprocket to the driver facing right side of the hub body with the guard plate outward, and secure it in place with the snap ring.
Snap ring CS-S500 sprocket Cassette joint pulley
LOC
K
LOCK
Align the yellow marks to install.
Cassette joint fixing ring Chainstay
CJ-8S20
JAPAN
Use whichever non-turn washers match the shape of the dropouts. [. . . ] Printed in Japan
LOCK
7R
8S
20
cassette joint to the hub with the cassette 3. When installing the cassette joint fixing joint fixing
CJ-
JA
PA
N
Non-turn washer (for right side)
6R
20
CJJA PA N
Bracket
8S
PA
N
Washer
20 8S [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DAHON ALFINE CS-S500
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DAHON ALFINE CS-S500 will begin.
