User manual DAHON ULTEGRA SL-BS78 TECHNICAL SERVICE INSTRUCTIONS

[. . . ] t General Safety Information WARNING ­ To avoid serious injuries: Obtain and read the service instructions carefully prior to installing the parts. [. . . ] Install the front lever in the same way. Do not turn the ring until the lever has been secured to the body unit. 1. Attach the body unit to the handlebar, and then use a 6 mm Allen key to turn the body fixing bolt counterclockwise to tighten it. Ring For smooth operation, use the specified outer casing and bottom bracket cable guide. Because the high cable resistance of a frame with internal cable routing would impair the SIS function, this type of frame should not be used. Body fixing bolt The sliding surfaces of the inner cable and outer casing should be greased before use. The shifting lever can be installed to handlebars with diameters of 19. 0 ­ 22. 0 mm. Operation of the levers related to gear shifting should be made only when the front chainwheel is turning. Parts are not guaranteed against natural wear or deterioration resulting from normal use. For any questions regarding methods of handling or maintenance, please contact the place of purchase. Body unit 6 mm Allen key Tightening torque: 5 ­ 6 Nm {43 ­ 52 in. lbs. } 2. Install the lever boss to the body unit. SI-6J60A SL-BS78 Bar End Shifting Lever Lever boss Technical Service Instructions 3. Install the lever to the body unit. 5. With the outer casing placed along the handlebar, cover the outer casing with the outer casing guide, and then use tape or similar material to provisionally attach it to the handlebar. Tightening torque: 2. 5 ­ 3 Nm {21 ­ 26 in. [. . . ] Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan C Jul. [. . . ]