User manual DAIKIN ALTHERMA NET3

[. . . ] When the Override function is activated, all the timers will by passed and turn ON the unit for a fix periods of 1 hour, 2 hours or 4 hours depends on the selection, after which it will turned off. 1 OM-NET3-0906-Daikin_EN 1 3/5/07, 9:58 AM · · Starting Operation: When the unit is turned off, press the ON/OFF button. The operation LED lights and the unit is turned on. Stopping Operation: When the unit is turned on, press the ON/OFF button. The operation LED is extinguished and control are turned off. 1. 2 1. 3 1. 4 SLEEP Button Press SLEEP button to activate the sleep mode or energy saving mode. FAN Button Press FAN button to select AUTO, HIG H, MEDIUM or L OW fan speed. MODE Button Press the MODE button to switch operation from C OOL , HEAT, AUTO, DRY, FAN. [. . . ] The RTC and Day setting can be changed by pressing DAY key, HOUR key or MINUTE key. If there is no further time related (DAY , HOUR and MINUTE) key is pressed for 15 sec, the unit will quit from the CLOCK setting mode. 7 -Day Programmable Timers The unit has 3 event functions, each event has an ON TIMER and an OFF TIMER. Press the timer key (ON TIMER or OFF TIMER) will enable Event 1 timer setting mode. Press the same key again will enable Event 2 timer setting mode. Press the 3rd times will enable the Event 3 (Event handset) timer- setting mode. Subsequent key pressed the unit will quit from timer setting mode. All timers are event triggered timers and can be overridden by the ON/OFF button and Override function. ii) iii) Set Event 1 and Event 2 Timers Under timer setting mode, "SET TIMER" will be shown on LCD and blink at 0. 5 sec interval. For Event 1 Timer setting, ` ON' or ` OFF' indication will appear and digit "1" will be displayed on the top left corner of the LCD. ` ON' or ` OFF' indication and digit "2" will be displayed during Event 2 timer setting. The timer setting can be changed through pressing the DAY key, HOUR key or MINUTE key. If there is no further time related (DAY , HOUR and MINUTE) key is pressed, the unit will quit from the timer setting mode. 2 OM-NET3-0906-Daikin_EN 2 3/5/07, 9:58 AM ENGLISH ENGLISH 1. 1 ON/OFF Button iv) Set Event 3 Timer via remote control (Optional) This timer can be controlled separately through remote control as well as ON TIMER or OFF TIMER keys. Timer 3 can be set like timers 1 and 2 like above except the DAY setting is not provided as this timer setting is valid everyday. An indicator `3' will display during the Event 3 timer setting mode. ` ON' or ` OFF' will blink at 0. 5 sec interval during the timer setting. If there is no futher time related (DAY, HOUR and MINUTE) key is pressed, the unit will quit from the timer setting mode. The ON/OFF timer setting received from remote control will override the Event 3 timer setting from the unit. 1. 8 Activating and canceling timers These timers will not triggered if the timer is not active. To activate the timers, press the TIMER ACTIVE key unit "TIMER ACTIVE" appears on LCD. [. . . ] If any part is missing, contact your dealer immediately. 1 Remote controller 2 Wooden screw 4. 1 x 16 (2 pieces) & machine screw (2 pieces) 3 Instruction manual 4 Battery 5 Connection wire 3. 2 Step-b y-step guide First, open up the casing of the LCD remote controller into its top and bottom case using a screwdriver. To do this, insert the screwdriver into the lower slot and slide it in the outward direction. ii) Fix the bottom case onto the wall with the 2 wooden screws provided. [. . . ]