User manual DAIKIN ALTHERMA HIGH TEMPRATURE QUICK GUIDE

[. . . ] Programming button for schedule timer 12. Outdoor quiet operation active Setting the clock Push and hold Adjust the time via Adjust the day via To save adjustments push until the clock starts to flash. Setting the schedule timer Note: if a remote room programmable thermostat is being used in the top right of the display. [. . . ] Repeat until settings flashes up on the controller and the previous step until either you don't require any further actions or a maximum of 5 actions have been selected. Push and hold subsequent day is flashing (if saving Monday, Tuesday will now be flashing). Repeat steps until everything is programmed, or copy the days as follows. Copying days If you require to copy the day you have just programmed then push previous programmed by pressing across to the next day by pressing and holding pressing and holding and once and it will take you back one step in the menu. This will allow you to select the day you had once. You can now copy that day and until setting flashes up on the controller and the subsequent day is now shown. To continue copying then repeat as before, until you have programmed the week or until the day you wish to schedule the timer. button to go back one step or until main screen 2) 24 hour schedule timer Once you have entered the night quiet mode, will be displayed. This schedule only has 5 actions (repeats every 24 hours) which can be viewed by pushing the (if previously programmed). To adjust the schedule timer push and hold until the clock symbol begins to flash. When programming for the first once to display action 1 next to the clock. time it will be necessary to push 03 These buttons will change the time of the action set. This button will change the desired function of the schedule timer from on to off. [. . . ] This setting will override any current setting at the time of operation. To activate the domestic hot water boost mode press and hold until the symbol starts flashing. [. . . ]