User manual DAIKIN BRC1E51A7

[. . . ] WIRED REMOTE CONTROLLER OPERATION MANUAL MODEL BRC1E51A7 Proper Use for Effective Energy Saving Thank you for purchasing the wired remote controller. This manual describes safety precautions required for the use of the product. Read this manual carefully and be sure you understand the information provided before attempting to use the product. Keep this manual where it is readily accessible after reading it through. If another user operates the product in the future, be sure to hand over this manual to the new user. Contents Notices Safety Precautions Items to be Strictly Observed . . . . . . . . . 2 Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The maximum quick cooling/heating operation period is 30 minutes. Used to set to "Low" "High" Used to set Automatic, Heat exchange, and Bypass. Operation start time and stop time can be set according to the day of the week. Either one of the following operation modes can be selected. · Operation at set temperature: Normal operation · Operation within set temperature range (between max. temperatures): Limit operation Up to 5 actions can be set for each day. Convenient holiday settings and temporary closure settings are possible. * Clock settings are necessary. * The system goes into schedule timer operation in the previous mode set for the system. 31 Ventilation Ventilation operation settings for total heat exchanger Ventilation rate Ventilation mode 32 33 Timer setting Schedule timer 35 Off reminder timer Used to set each operation period of the system. Possible to set in 10 minute units from 30 to 180 minutes. 42 44 Service Contact/Model Information Used to display the service contact and model information. 24 English Setting and display items Description Used to make LCD contrast adjustment. Used to set to standard or detailed display mode. Display Standard or detailed display Detailed display settings Selectable from the display room temperature, outdoor temperature, system, or without any display items. Used to display a list of current settings for available items. Used to make date and time settings and corrections. The clock is in 24 hours real time clock. The accuracy of the clock is within ±30 seconds per month. If there is a power failure for a period not exceeding 48 hours, the clock will continue working with the built-in backup power supply. The clock needs settings again if the power failure period exceeds 48 hours. Reference page Convenient functions Contrast adjustment Display changeover Standard or detailed display 45 46 Setting status list Clock setting 48 48 Language changeover The displayed language can be selected from the following language. (English/Deutsch/ Français/Español/Italiano/E/ Nederlands/Portugues/Pycc/ürkçe) 50 Note: Available setting items vary with the model connected. Only the available setting items appear in the menu. Menu Items of Sub Remote Controller If two remote controllers are in control of a single indoor unit, the following menu items are not set in the sub remote controller. Set temp mode changeover Schedule timer Off reminder timer Home leave Indoor unit Outdoor unit Two remote controllers in control English 25 Menu Manipulation Manipulating the Main Menu Screen Display Method for Main Menu Operation Method 1 2 3 4 Press Menu/Enter button. Cool Set temperature 28°C Return Setting Basic screen MainMenu Set temp mode changeover Airflow Direction Quick Cool/Heat On/Off Ventilation Timer setting Service Contact/Model Info Return Setting 1/2 The main menu screen will appear. Main menu screen Instructions for manipulating the buttons will appear. Selecting items from the main menu. 1. Press buttons to select the desired item to be set. [. . . ] Press Menu/Enter button to set the clock and return to the basic screen. * When setting schedule timer, the display return to the settings screens. Caution Daylight Saving Time Caution : The following period has adopted Daylight Saving Timer. [Start] Last Sunday, March AM 2:00 [End] Last Sunday, October AM 3:00 Please consult with your Daikin dealer to change a setup. Language changeover Selectable languages Operation Method 1 MainMenu Convinient functions Setting status list Clock setting Language changeover 2/2 Display the main menu screen. (See page 26. ) Return Setting Press buttons to select Language changeover on the main menu screen and press the Menu/Enter button. 50 English 2 Language changeover Selectable languages English Return Setting Press buttons to select "Language" on the language changeover screen. English/Deutsch/Français/Español/ Italiano/E/Nederlands/ Portugues/Pycc/ürkçe Pressing Menu/Enter button to confirm settings and return to the basic screen. Maintenance Filter Sign Resetting Operation Method 1 Cool Set temperature 28°C Clean the filter When the time to clean the filter or element has come, one of the following messages will appear on the bottom of the basic screen. "Clean the filter" "Clean the filter and element" "Clean the element" Wash, clean, or replace the filter or element. [. . . ]