User manual DAIKIN BRC4C61

[. . . ] 8 Simple Settings in Direct Buttons for Basic Operation Items Basic Operation Method (Use of Direct Buttons) Cool/Heat/Auto/Fan Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Program Dry Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Home Leave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Ventilation Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The display "Auto" will appear for the heating/cooling simultaneous operation system only. At that time, the other remote controllers with no selection right will follow suit and change the display automatically. Cool/Heat Selection Eligibility The "Cool", "Heat", "Auto" can be set for only the remote controller for which the cooling/heating selection eligibility is set. (The display "Auto" will appear for the heating/cooling simultaneous operation system only. ) The remote controller with the selection eligibility " (without " (Changeover under control) displayed) Other remote controllers (with " " (Changeover under control) displayed) The system will go into the mode set in the remote controller. The system, however, can be switched to fan mode or from "Cool" to "Dry". The remote controller with the selection eligibility " (without " (Changeover under control) displayed) Other remote controllers Set to "Fan" mode. " (with " (Changeover under control) displayed) The system cannot be set to other modes except fan mode. 1. Set to "Cool", "Heat", "Dry", "Auto" mode. 2. 22 English Precautions for Setting Cooling/Heating Selection Eligibility The cooling/heating selection eligibility needs to be set for a single remote controller in the following case. (Cooling/Heating selected operation system) (Cooling/Heating simultaneous operation system) BS unit: The BS unit is used for cooling or heating mode selection. Indoor unit Indoor unit A number of indoor units are connected to a single outdoor unit. Set the cooling/heating/fan selection eligibility in one of the remote controllers. A single BS unit is connected to a number of indoor units. Set the cooling/heating/auto/fan selection eligibility in one of the remote controllers. Key Lock Operation Method Make settings and cancel settings in the basic screen. 1 2 Cool Set temperature 28°C Continue pressing Menu/Enter button for at least four seconds. (During backlight lit) Return Setting Basic screen Cool Set temperature 28°C Return Setting " " will appear. The clock needs settings again if the power failure period exceeds 48 hours. Reference page Convenient functions Contrast adjustment Display changeover Standard or detailed display 45 46 Setting status list Clock setting 48 48 Language changeover The displayed language can be selected from the following language. (English/Deutsch/ Français/Español/Italiano/E/ Nederlands/Portugues/Pycc/ürkçe) 50 Note: Available setting items vary with the model connected. Only the available setting items appear in the menu. Menu Items of Sub Remote Controller If two remote controllers are in control of a single indoor unit, the following menu items are not set in the sub remote controller. Set temp mode changeover Schedule timer Off reminder timer Home leave Indoor unit Outdoor unit Two remote controllers in control English 25 Menu Manipulation Manipulating the Main Menu Screen Display Method for Main Menu Operation Method 1 2 3 4 Press Menu/Enter button. Cool Set temperature 28°C Return Setting Basic screen MainMenu Set temp mode changeover Airflow Direction Quick Cool/Heat On/Off Ventilation Timer setting Service Contact/Model Info Return Setting 1/2 The main menu screen will appear. Main menu screen Instructions for manipulating the buttons will appear. Selecting items from the main menu. 1. Press buttons to select the desired item to be set. Press Menu/Enter button to display the selected settings screen. To go back to the basic screen from the main menu screen, press the Cancel button. Caution While setting items, if a button is not pressed for 5 minutes, the screen will automatically go back to the basic screen. 26 English Set temp mode changeover Limit Operation Limit operation provides thermostat control within the range of the set minimum and maximum temperature. The minimum temperature setting will trigger heating. The maximum temperature setting will trigger cooling. Operation Method The limit operation can not be enabled when a centralized control is connected. 1/2 1 MainMenu Set temp mode changeover Airflow Direction Quick Cool/Heat On/Off Ventilation Timer setting Service Contact/Model Info Return Setting Display the main menu screen. (See page 26. ) Fan Set temperature max min 28°C 20°C Return Press the menu button Press buttons to select "Set temp mode changeover" on the main menu screen. Pressing Menu/Enter button takes you back to the basic screen, and the set temperature is displayed in max °C min °C. (Limit Operation) * To return to the normal set temperature screen, use "Set temp mode changeover" in the Main Menu again. Basic screen 2 Fan Set temperature max min 28°C 20°C Return Press the menu button To change the set temperature, press buttons. [. . . ] Holding down the button causes the number to change continuously. Holding down the button causes the number to change continuously. Clock setting Year 2008 Month 10 Day 07 Tuesday 12:00 Return Setting Clock setting Year 2008 Month 10 Day 07 Tuesday 12:21 Return Setting Select "Minute" with buttons. Holding down the button causes the number to change continuously. The settings confirmation screen will appear. Note: The date can be set between January 1, 2008 and December 31, 2099. English 49 Menu Manipulation 7 Clock setting Is it settled by setting? Yes Return No Setting Press button to select Yes on the settings confirmation screen. [. . . ]