User manual DAITSU DF300

[. . . ] user manual | WELCOME | Dear user, thanks for purchasing this product. Much investment in time and effort has gone into its development, and it is our hope that it will give you many years of trouble-free service. 1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be void. Avoid all contact with water and have dry hands before using. [. . . ] Manully roll the lens switch to choose the proper focus length. Marco mode : 0. 5m~1. 2m Normal mode: 1. 2m~ 3. Use control buttons to adjust zoom in or zoom out for the image you want. <Digital zoom from x1 to x6>. 8 DSC DV PLAY 4. (LCD appear : "Capture3. . 2. . 1. . . " meaning camera is saving image) When the LCD screen is open , the picture on the LCD screen is a mirror image , This feature allows the camera subject to view him-or herself on the LCD screen. Focus Adjust the focus before taking picture , rotate the focus switch to image. Macro Normal 0. 5m-1. 2m 1. 2m8 or , The following table helps you to select focusing distance to get the best ~6~ Self-timer P press button , you can set to take photo selftimer delay 10 seconds, button again to cancel selftimer mode. Flash strobe The camera provides 4-way flash mode as in the following table, to press button to choose flash mode . Auto flash Flash off Force flash Force flash for near location NOTE: 1) When you want to use flash strobe : in the state of Macro , you must use flash mode , never use the in the state of Normal , you should use flash mode. 2) The flash range :0. 5m~2. 5m flash mode; LCD display under the DSC mode. Quality Remaining pictures count 36 Power full Power Warning Power Low 2. 0X Zoom selftime NOTE: Remaining pictures count may vary depending on the resolution and color saturation, the data is for reference only. ~7~ 4. Set the mode switch to Recorder mode. DSC DV PLAY 2). Utilize the Menu/OK button to select the video. Recorder Video Voice 3). Press the snap button to record video clip, then the LCD will show the time of recording video clip, press the snap button again to stop recording. The resolution of the dynamic image and relevant specification is on page 28. LCD display under the Camcorder mode. Camcorder Video clip recording time 00:04 Power full Power Warning Power Low ~8~ 5. Set the mode switch to Recording mode. DSC DV PLAY 2). Utilize the Menu/OK button to select the voice. Recorder Video Voice 3). Press the snap button to record voice, led will flash all the time , then LCD will turn off to save the battery, press the snap button again to stop recording. LCD display under the Recording Video mode. Power full Power Warning Power Low ~9~ Playing Back Your Images on the LCD 1. Playing Back Your Images on the LCD 1). Set the mode switch to Display mode. Display Mode 2). It will display nine pictures on the LCD. 3). Press the Control buttons to select the image, then Press the SNAP button, view it on the LCD display. You can switch to MINIATURE and full screen image by pressing MENU/OK button. LCD display under the Display mode. Display Power full Power Warning Power Low ~ 10 ~ 2. TV Out Connect your camera to the TV via an A V cable to share pictures and audio recordings with friends and family. 1). Connect the audio and video ends of the AV cable to your TV. Connect the other end to your camera. Audio 4). Turn on your camera and Set mode switch to DSC mode. Press the Menu/OK button with control button Press the Menu/OK button , with control button mode, press Menu/OK to play. to TV Out menu, select you need DSC DV PLAY Before unpluging the AV cable from TV, you should turn off the camera first. [. . . ] (For details, refer to the "Removing the card" section on page 3) Charging the flash strobe requires more power "to" battery. When the battery is under the status of low power, the strobe can't work. Please charge the battery. Cannot set the strobe to the "On" mode. ~ 24 ~ The image is too blurred. Please adjust the focus (refer to page 6). You may need to take pictures or movies in the place with adequate light or use the flash strobe. If you want the movie with sound playback, please copy the movie to your computer and view it on the computer. [. . . ]