User manual DALLEE ELECTRONICS DIESEL MOTOR WIRING HELP

[. . . ] AC track power installation - Series Motor / Track connections Main Power / Motor Connections Motor Brushes 1 Red 2 Brown Help for Am Flyerl series motors. [. . . ] chassis pickup) (2 rail . . . . . . . . . left rail pickup) Brush1 - connect original yellow to Brown (2) Brush2 - connect original green toRed (1) 3 4 5 6 Motor Field Wires 5 . . . . . Yellow 6 . . . . . . Orange If the engine does not have a chassis (outside rail) pickup from each truck you should add one to prevent intermittent track pickup from occuring. Adding multiple center rail pickups will also help. These pictures show where the grounded field wire needs to be broken from the chassis for the motor power. [. . . ] When more than one center roller is available always connect to both, also secure the center pin from rotating with the roller. Field - Orange Brush - Brown (previously connected to the chassis pickup ground lug above) Field - Yellow Colors indicated are those that match the E-Unit and LocoMaticTM main board connector and not the locomotives existing wires. Field - Orange Brush - Brown Brush - Red Track Input - Black (chassis pickup) Track Input - Black (chassis pickup) Brush - Red Track Input - Blue (from roller pickup) Track Input - Blue (from roller pickup) Field - Yellow (previously connected to the chassis pickup ground lug above) [. . . ]