User manual DANA 4360-105

[. . . ] Keep all packaging material out of the reach of 5 mm children. The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property. € If the appliance is to be installed above an oven, the oven must be equipped with a forced ventilation cooling system. [. . . ] If the booster for the rear left-hand hotplate has been activated, the power level of the front lefthand hotplate will be reduced). For further information, please refer to the Technical description of the models. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Adjust the power level of the cooking zone. The indicator light corresponding to the selected zone will start flashing. - + or button is pressed for an extended period of time, the display scrolls quickly though the power levels and timer minutes. Set the cooking duration using the buttons. When the time has elapsed, a buzzer will sound (for one minute). The timer begins counting down immediately. Repeat the above procedure for each hotplate you wish to programme. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. Set the desired duration using the buttons. - + and 30 The FlexiZONE mode The FLEXI Zone can be used to set the power of two "interconnected" hotplates to the same level. It can be activated if the two hotplates are OFF, by pressing the FLEXI ZONE button The FLEXI ZONE can be activated while the hob is on by pressing the FLEXI ZONE button once; the LEDs corresponding to both linked hotplates light up. The 2 LEDs remain lit as long as the hotplates are linked (if FLEXI ZONE button is pressed again, the hotplates are disconnected and are both set to power level 0). Pressing the +, - or Max buttons for one of the two FLEXI hotplates also affects the display corresponding to the other hotplate. To deactivate the FLEXI ZONE, press the button . A timer may be set for the FLEXI zone; this appears on the display and both LEDs corresponding to the linked hotplates light up. When the Timer button is pressed, the two linked hotplates are treated as if they were a single zone. Selecting and using FLEXI ZONE To begin using the FLEXI ZONE, press the To set the power level (see above). [. . . ] Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For further information relating to the correct disposal of exhausted household appliances, owners may contact the public service provided or their local dealer. 34 Care and maintenance Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. [. . . ]