User manual DANA 4900-3

[. . . ] Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose Unpacking and levelling Unpacking 1. Remove the washing machine from its packaging. [. . . ] The machine automatically selects the maximum temperature and spin speed set for the selected wash cycle; these values cannot therefore be increased. The temperature can be decreased by button, until the cold wash “OFF” pressing the setting is reached. The spin speed may be progressively button, until it is completely reduced by pressing the excluded (the “OFF” setting). If these buttons are pressed again, the maximum values are restored. To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period has been reached. When this symbol lights up on the option is enabled, the display. To remove the delayed start function press the button until the text “OFF” appears on the display. € Press the button to enable the function; the indicator light corresponding to the button will switch on. € Press the button again to disable the function; the indicator light will switch off. The functions may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light will become green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be on). , , , 7 Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Do not use hand washing detergents because these create too much foam. Open the detergent dispenser drawer and pour 3 in the detergent or washing additive, as follows. MAX 2 1 compartment 1: Detergent for the wash cycle (powder or liquid) Liquid detergent should only be poured in immediately prior to the start of the wash cycle. compartment 2: Additives (fabric softeners , etc. ) The fabric softener should not overflow the grid. Extra compartment 3: Bleach Preparing the laundry • Divide the laundry according to: - the type of fabric/the symbol on the label - the colours: separate coloured garments from whites • Empty all garment pockets and check the buttons. € Do not exceed the listed values, which refer to the weight of the laundry when dry: Durable fabrics: max. Mix 15’: this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and therefore saves both energy and time. By selecting this wash cycle ( at 30°C), it is possible to wash different fabrics together (except for wool and silk items), with a maximum load of 1. Baby cycle: this wash cycle can be used to remove the soiling typically caused by babies, while ensuring that all detergent is removed from nappies in order to prevent the delicate skin of babies from suffering allergies. [. . . ] Make sure the wash cycle has finished and unplug the appliance. Using a screwdriver, remove the cover panel on the lower front part of the washing machine (see figure); 10 Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. gB Problem: The washing machine does not switch on. [. . . ]