User manual DANBY DAC8404DE

[. . . ] x Do not climb on, or place objects on, the air conditioner. x Do not hang objects from the indoor unit. x Do not set flower vases or water containers on top of air conditioners. x Do not expose the air conditioner directly to water. [. . . ] x Turn off power source when not using the unit for extended periods. x Check the condition of the installation stand for damage. x Do not place animals or plants in the direct path of the air flow. x Do not drink the water drained from the air conditioner. x Do not use in applications involving the storage of foods, plants or animals, precision equipment, or art works. x Do not apply any heavy pressure to radiator fins. x Operate only with air filters installed. x Do not block or cover the intake grille and outlet port. x Ensure that any electronic equipment is at least one metre away from either the indoor or outdoor units. x Avoid installing the air conditioner near a fireplace or other heating apparatus. x When installing the indoor and outdoor unit, take precautions to prevent access to infants. 21°C to 54°C approx. Indoor Temperature 21°C to 32°C approx. 21°C to 32°C approx. Indoor Humidity 80% or less - If the cooling operation is used at over 33°C(indoor temperature) then, it does not cool at its full capacity. E-11 Cleaning Your Air Conditioner HC105TEZA, HC105TBZA, HC140TGZA, HC140TFZA DAC8404DE, HC175TFZA, HC230TGZA, HC230TFZA To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. The air filter is an optional accessory. IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the electric circuit breaker used for the unit. 1 Remove the fixing bracket on the base of air filter kit. 2 Pull out the air filter in the direction of the arrow. 3 Remove all dust on air filter with a vacuum cleaner or a brush. In case of serious dust accumulation, put the air filter in warm detergent water and shake it vertically. 4 Dry the air filter. 5 When you have finished, insert the filter into the unit. 6 Reinstall the fixing bracket. 7 Clean the outdoor unit with a vacuum cleaner or a brush once a month. Note Wired Remote Controller Wireless Remote Controller After cleaning the air conditioner, press the Filter Reset button. E-12 BC052TEZA, BC052TBZA, BC070TEZA, BC070TBZA To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the electric circuit breaker used for the unit. 1 Open the front grille by pushing tabs on the grille. 2 Remove the front grille. 2-2 Open the front grille about 45° and pull it forward. Remove two brackets by unfastening screws. 3 4 Pull out the air filters. 5 Remove all dust on air filter with a vacuum cleaner or a brush. In case of serious dust accumulation, put the air filter in warm detergent water and shake it vertically. Dry the air filters. 6 7 When you have finished, insert the filter into the original position. 8 Reinstall the bracket, then close the front grille. Note After cleaning the air conditioner, press the Filter Reset button. Wired Remote Controller Wireless Remote Controller E-13 ENGLISH Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save your time and expense of an unnecessary call. [. . . ] They may save your time and expense of an unnecessary call. Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. Wired Remote Controller The air conditioner does not operate with the remote controller x is displayed on the wired remote controller. In this case, turn the air conditioner off and contact your dealer. Wired Remote Controller When turning on/off the air conditioner, it is not turned On/Off immediately. x In case of using the wired remote controller for a group, the air conditioners connected to the remote controller are turned on/off in order. [. . . ]