User manual DANE-ELEC MINIPLAYER SLIM QUICK START GUIDE

[. . . ] Right Side The surface of the player is attached with a protection film before leaving factory. Touch keypad Clicking Key: Lay your finger on one end of keypad Sliding lightly on keypad Click Click the Power ON/OFF button again, start to play. If it displays no file, pls run Update Music Library. Tap Earphone MIC Strap USB Port Do not peel off the Mask!Key positions Lay your finger on key positions of keypad Tap lightly Long Click 2. Power Off When you press and hold the power ON/OFF button for about 3 seconds, the power turns off. [. . . ] Initializing the operating system in the player A. Click and hold the Next key and then hold the power ON/OFF button, do not remove your finger until it appears the yellow screen. Then it initializes the OS to the original factory settings. Click and hold the Previous key and then hold the power ON/OFF button, do not remove your finger until it appears the purple screen. After 2 seconds, it appears the green screen, then it initializes the OS to the original factory settings. After finish this, you may need to download the firmware package from internet and operate the upgrading. www. danedigital. com Important Cautions Package Contents Installation CD System Requirement Pentium 133MHz or Higher 32MB Main Memory or Higher 40MB Hard Disk Space or More CD-ROM Drive USB Port (2. 0) Windows 98SE/ ME / 2000 / XP Install Software · · · · · · · Connecting Mini Player Precautions for Using the Product Turn On / Auto Power Off To power on the player, make sure it has enough power, long press the Power On/Off button for over 3 seconds. When there is no button operation for about 3 minutes while the player is stopped, it is automatically turned off. To power off the player, press and hold the Power On/OFF button until it finishes with shutting down procedure. Reset Mini Player When it is dead caused by improper operation, you have to reset your mini player. Disconnect it to a USB cable or AC Adapter, press and hold on the Power button( ) key for over 12 seconds to reboot. Update Music Library After finish copying the music, using Main Menu-Music-Update Music Library on the player before your listening music so that you can organize and assort them by artist, album or genre. Otherwise, you can only browse the new copied songs from All Songs on the player. Initialize OS to the Original Factory Settings When it is not able to turn on and disable connecting the player to your PC after resets, please click and hold the Next key ( ) and Power On/OFF button for about 8 seconds to initialize the OS to the original factory settings. All data will be deleted in the player. Congratulations on the purchase!The Meizu's home page provides the overview of company and products, other related information, and answers to common questions. Firmware and software updates are also available as well as the most recent information about your Meizu product. Stand Accessories Provided into the package: Connecting to a Computer Connect the small end to player, large end to PC. USB Cable * Large End USB port on the player Do not subject the player to severe impact or jarring. Vibration experienced during walking or exercising will not affect the player. However, dropping a heavy object on the player may result in damage or sound distortion. [. . . ] The video convert tool installation is required for video conversion. When installation is automatically not started, execute the setup. exe in the installation CD, and then the Manager program is automatically setup. Earphones USB Cable Installation CD Quick Start 1. Turn it on before your connecting Power it on, then connect the player to the computer using the USB cable supplied in the package. It will be charged using the power supply from the PC. [. . . ]