User manual DANE-ELEC SO EASY HDMI

[. . . ] HDMI Media Player Hard Disk User Manual PC/MAC CONTENTS 1. faQs 4 4 5 7 10 13 18 22 23 24 2 Thank you for choosing the So Easy hDmi multimedia player. for better use of this product, please carefully read this user's manual. a national patent has been filed for the So Easy hDmi. [. . . ] Press the viDEO key on the So Easy hDmi remote to select YPbPr OUT mode. The menu will appear on the television screen. You must also connect the av cable (white and red) for sound since the YPbPr cable only transmits the image. (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER USB-HOST av Output mode USB-HOST YPbPr OUTPUT mODE (Progressive scan video component) 12 To connect to a television and use the hDmi output: select hDmi mode, then press the viDEO key on the remote to switch to hDmi mode. The menu will appear on the television screen. You must also connect the av cable (white and red) for sound since the YPbPr cable only transmits the image. To connect to a hDmi monitor and use the hDmi output: press the viDEO key on the remote to switch to hDmi mode. The menu will appear on the television screen. iNSTrUCTiON fOr YOUr SOfTWarE SYSTEm Before beginning basic operation, please set up hDD player to your liking. The Setup menu enables you to adjust the Tv select the format, language etc. Once a setup is defined, the unit will operate with this setup as default. Unless you reset the device, this setup will operate as default even in the event of a power cut. Once he power and av cables have been connected, press the Power On/Off button. The unit will automatically begin data-reading, which is indicated by the blue led. Once reading is complete, the screen displays a menu (see picture below). Use the directional keys to select the item of your choice, then press the "Enter" button to confirm. 6. Press the SETUP button on the remote control. The Setup menu appears on screen (see picture below). Use the directional keys (up, down, left, right) to select the item of your choice, then press the "Enter" button to confirm your highlighted selection. Press the "Exit" or "Setup" button to exit the Setup menu. (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER USB-HOST hDmi Output mode 13 6. Tv type: the Tv mode is originally set to "multi system". in the event that video images are fuzzy or skip intermittently, please change the Tv mode setup. for European countries, please select PaL. 6. [. . . ] Change the battery while making sure you are using the correct battery type. The remote control is being operated too far from the unit or from to open an angle. Please move closer to the unit and operate the remote control within a 7m radius and at a ±30degree angle [NOTE ­ 60 degrees in the remote Control section]. 24 iv. The remote control will not operate correctly unless it is being pointed at the unit. [. . . ]