User manual DATA ROBOTICS DROBOPRO FS REV 05

[. . . ] 5 What to do when not using your FS storage array . Using Drobo Dashboard with your FS array . Thank you for giving another Drobo® storage device a good home!TM have been working since 2004 to make protecting, storing and managing your digital content truly effortless. [. . . ] the shares are listed on the main Drobo Dashboard page. By clicking in the "Mount" check box next to the share name, you can mount the network drive on your computer. Drobo Dashboard will automatically mount the selected shares every time you restart your computer so that they are always available to you when you are connected to the network. If the share is protected, you must first log in using your username and password (both case-sensitive) before you can mount the share. You can install Drobo Dashboard from the Resource CD that came with your FS array or you can download the latest version at: www. Once your FS array is set up, you can access the shares just as you would any normal network drive or volume if you prefer not to use Drobo Dashboard: Windows XP 1. You can click the Browse button and locate the share you want to access; or you can manually enter the share name: \\drobo-fs\sharename (Replace "drobo-fs" and "sharename" with the names you chose for your Drobo FS, accordingly. ) Note: If you have a DroboPro FS, replace "drobo-fs" with "drobopro-fs" in the above. Choose a name for your network drive and click Next. The wizard will confirm your actions and give you the chance to open the network place (i. You can click the Browse button and locate the share you want to access; or you can manually enter the share name: \\drobo-fs\sharename (Replace "drobo-fs" and "sharename" with the names you chose for your Drobo FS, accordingly. ) Note: If you have a DroboPro FS, replace "drobo-fs" with "drobopro-fs" in the above. After you either choose from the list or type the address, click Finish. The share will now show up in Computer or Windows Explorer. If you only want to access the drive, but not mount it in Windows: 1. In the left panel, either double-click "Network" or single-click the triangle next to "Network. Click the share name and it will either prompt you for a username and password or otherwise open the share in the Explorer window. In the left panel of Finder, click the triangle just to the left of "Shared" Locate your Drobo FS or DroboPro FS from the list and open it. Choose the share you want to mount by simply double-clicking the share name. If necessary, enter your username and password. This section addresses some common questions about your FS array. For the latest technical information on your FS storage array, please visit our knowledge base at http://support. [. . . ] This warranty gives You specific legal rights, and You may also have other rights that vary by country, state or province. Data Robotics, the warrantor under this Limited Warranty, is identified at the end of this document according to the country or region in which the product purchase took place. OBTAINING WARRANTY SERVICE Product Replacement: No Product may be returned directly to Data Robotics without first contacting Data Robotics for a RMA number. You can contact us to request an RMA number by contacting technical support. [. . . ]