User manual DAXTEN DOMINION SX

[. . . ] Installation and Operations Manual SX4 SX8 SX16 SX32 SX48 Raritan Computer Inc. 400 Cottontail Lane Somerset, NJ 08873 USA Tel. 1-732-764-8887 E-mail: sales@raritan. com http://www. raritan. com Raritan Computer Japan, Inc. Shinkawa NS Building 1-26-2 Shin-kawa, Chuo-ku Tokyo 104-0033 Japan Tel. [. . . ] To allow this kind of access you can do it one of two ways. Set the no_root_squash option for the directory set up to receive the port log files. Example /etc/exports entry: /nfs/domlogging 192. 168. 0. 0/16 (rw, no_root_squash) 2. Force all accesses to a certain UID/GID. Example /etc/exports entry: /nfs/domlogging 192. 168. 0. 0/16 (rw, all_squash, anonuid=700, anongid=700) Make certain that the GID/UID pair has write permission to the particular directory. Explaining these concepts or providing other information about NFS is beyond the scope of this document. Please provide your Systems Administrator with the above information, and ask them any additional questions about setting up the NFS server; should they have any additional questions, please contact Raritan support. CHAPTER 9: SNMP 81 Chapter 9: SNMP SNMP Trap Configuration The Raritan Enterprise MIB can be accessed via the FAQ Support section on Raritan's Web site, www. raritan. com. Name snmp [<enable|disable> [COMM_NAME]|<add|del> RECIPIENT>] Description Configure the SNMP feature. snmp With no parameters, the current SNMP configuration is displayed. snmp <enable|disable> [COMM_NAME] Depending on the parameter, enable or disable SNMP traps. Specify the community name used to send traps using the optional COMM_NAME parameter. snmp <add|del> RECIPIENT Add or delete trap recipients. A recipient is an IP address with an optional space- separated port number. If a recipient with a port number is to be removed, include the port number in the delete command. Traps may be sent to multiple ports with the same IP address. NOTE: At this time, the Dominion SX system must be rebooted for configuration changes (other than disabling SNMP) to take effect. Example:( in this example, the username is TANAKA) TANAKA:Command>snmp Enabled: N Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 TANAKA:Command>snmp add 10. 0. 0. 56 78 Any SNMP configuration changes require rebooting to take effect. TANAKA:Command>snmp Enabled: N Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 10. 0. 0. 56:78 TANAKA:Command>snmp del 10. 0. 0. 56 Any SNMP configuration changes require rebooting to take effect. 82 DOMINION SX INSTALLATION AND OPERATIONS MANUAL TANAKA:Command>snmp del 10. 0. 0. 56 78 Any SNMP configuration changes require rebooting to take effect. TANAKA:Command>snmp Enabled: N Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 TANAKA:Command>snmp enable Any SNMP configuration changes require rebooting to take effect. TANAKA:Command>snmp Enabled: Y Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 CHAPTER 10: SYSTEM CONFIGURATION 83 Chapter 10: System Configuration Local Port Access Configuration Name lpa [<enable|disable> [BPS]] Description Configure the Local Serial Port Access feature. lpa With no parameters, the current LPA configuration is displayed. lpa <enable|disable> Depending on the parameter, enable or disable usage of the serial port for LPA. lpa <enable|disable> BPS Enable or disable LPA as above, but the optional port speed is set. [. . . ] Similarly, you may close the current browser, open a new browser, and login again. This provides an additional security feature so that no one can recall information stored in cache to access the unit. Try reloading using <Shift-Reload>. If this does not work, check your network connections and network status. [. . . ]