User manual DAXTEN RP119 BROCHURE

[. . . ] Available with 100, 225 or 400 Amps and up to 415 volts, Starline can support any size of data centre. The connections between the tracks consist of a patent protected spring pressure connection which is screw and bolt free, preventing loose connections or flaking. The same connections are used to connect the power plug-ins to the busbar ensuring a secure and solid connection at all times. [. . . ] The same connections are used to connect the power plug-ins to the busbar ensuring a secure and solid connection at all times. The entire busbar system is easy to assemble and dismantle meaning that tracks can be inexpensively installed, moved and reused regardless if it has been installed overhead or under the raised floor. The plug-ins are designed to allow for individual requirements. Current monitoring, which can be accessed via RS232, IP or Modbus, can be included per rack or per busbar run. The number of and type of connectors is determined by your own needs. For example, a 16A single phase connector can be situated next to a 32A three phase connector in the same plug-in. Even drop cords and hard wire options are available. If redundancy is required, then a second parallel busbar is added. Every interruption of the power supply can have catastrophic effects on IT operations, company data and critical transactions. With Starline you can be assured that the power supply is working all of the time. Mission Critical Data Centres The flexible bus design, the flexible plug-in locations, the option to chose the level of redundancy for your power distribution system and the easy extension capacities of the Starline solution are some of the reasons, why a large number of well known companies trust in Starline. Further economic aspects play a big role: The high durability and ease of both reconfiguration and relocation make Starline solutions the busbar with the lowest TCO in the market. Significant time and cost savings result when using Starline as you do not need to consult an electrician when changing your power distribution system. Finally the very short installation time, coupled with a few seconds to add another plug-in to the system, guarantees efficient time usage by the technical staff allowing them to spend more time on other important tasks. Test-Labs and R&D environments R&D and test environments often suffer from spatial constraints and dense server rooms packed with hardware and cabinets. Additionally, the systems have to be constantly configured and reconfigured to simulate real world scenarios in order to properly test and develop. In these environments Starline has proven its value a thousand times. It enables the IT staff to easily and quickly reconfigure their power distribution system without fighting with complex and confusing cabling or using tools. [. . . ] Additionally, the systems have to be constantly configured and reconfigured to simulate real world scenarios in order to properly test and develop. In these environments Starline has proven its value a thousand times. It enables the IT staff to easily and quickly reconfigure their power distribution system without fighting with complex and confusing cabling or using tools. [. . . ]