User manual DAXTEN SCOUTCOMBO 16 BROCHURE

[. . . ] Supports VGA, SVGA and MultiSync monitors. Select via Push-button, Keyboard Hot Key control or Menu Driven OSD Comes with Auto-Scan mode for convenient automatic switching. Front panel status LEDs give a clear indication of the active PC. Tri-Level Cascade, allowing up to 4096 Servers to controlled from one console. Hardware Installation Before connecting your computers and console devices to the SCOUTcombo switch, please ensure that all devices are powered off. [. . . ] OSD Setup Banner Time: Sets the banner display time. ­ 5 seconds to 15 seconds in 5 second increments. Position: Menu - Allows you to set the position of the OSD menu, by using the arrow keys. Banner - Allows you to set the position of the channel banner, by using the arrow keys. Choices are Scroll Lock , Caps Lock or Ctrl Note: Hot Keys can also be changed by the use of hot key command K. e. g. : If the hot key is set to Scroll Lock, then Scroll Lock Scroll Lock K make Caps Lock or Ctrl the hot key. Enter will Sound: Enable (ON) or disables (OFF) the internal buzzer. Language: Sets language of the OSD menu. Choices are: English (En), Deutsch (De) or Francais (Fr). F3: - Logout / Console Lock When the console is in locked mode, the push buttons and the console will lock. Pressing any key on the keyboard will present an unlock window. This will only accept the correct password. Note: If you forget your password, then there is no way in which to disable the security and the switch will need to be returned to Daxten. F4: - Rename. Allows you to rename the PC / Server name shown on the OSD menu and channel banner. F5: - Security Mode Entering the correct password enables the security function. Note: The Default settings are User Name: admin Password: 123456 After setting the security mode to ON, this automatically enables the Lock Mode (F3), and also allows the use of the Hot Key H command. This will lock the console and log the user off. Only the Administrator can unlock the console. Users will have access to servers for which they have rights to access. Security Setup User Authorisation Setting F6: - Lock Port This blocks all access to the locked server. An "L" with be displayed in the Status column of the OSD menu. The port can be unlocked by selecting F6 from the OSD menu and keying in the password. Port Lock Channel Banner (Single Switch) 1. PC name (Channel) Channel Banner (Cascaded Switches) 1. PC name (Channel) st Channel Banner (Scan Mode) 1. PC name (Channel) SUN Combo keys The SCOUTcombo can emulate some of the special SUN keys to perform special functions in the SUN Operating System environment. So when the SCOUTcombo is connected to a SUN computer, the switch emulates these SUN keys using a set of key combinations called Combo keys. SUN key Stop Props Front Open Find Again Undo Copy Paste Cut Combo key Left key Left Alt Left key Left Ctrl Left key F1 Left key F2 Left key F3 Left key F4 Left key F5 Left key F6 Left key F7 Left key F8 SUN key Help Compose Mute Volume Down Volume Up Power Combo key Left key F11 Left key Left Shift Left key 1 Left key 2 Left key 3 Left key F12 Reset Switch Press the reset switch to perform a system reset. This switch must be pushed with a thin object, for example, the end of a paper clip, or a ball point pen. Cascading the SCOUTcombo The SCOUTcombo can be cascaded up to three levels, enabling control of a maximum of 4096 servers. [. . . ] The above limited warranty is voided by occurrence of any of the following events, upon which the product is provided as is, with all faults, and with all disclaimers of warranty identified below: 1. If non-Daxten approved power supply or cabling is attached to the product. If defect or malfunction was caused by abuse, mishandling, unauthorized repair, or use other than intended. If unauthorized modifications were made to product. [. . . ]