User manual DAXTEN VOYAGER IP

[. . . ] Voyager IP User guide Specifications Ethernet Connection Serial Port Concurrent Users Data Encryption TCP Ports USB Port Operating Systems One ­ RJ 45 - 10/100 Mbit/sec auto-sensing. One ­ RJ 45 1 user + 7 view Only for current session 128bit SSL 443, 900, 901, 902. Ports 900-902 are configurable from port number 800 upwards One ­ Reserved for future use. Target Server Windows, Dos, LINUX, UNIX, QNX, SGI, FreeBSD, BeOS, Open VMS, Novell 3. 12 and later, Alpha UNIX, HP UX, SUN, Solaris, Java Desktop System Client Computer Windows 2000 or higher with IE 6. 0 or higher and ActiveX Target Server Up to 1600 x 1200 @ 85Hz Client Computer Recommended - resolution should be higher than the Target Server Both auto and manual modes 128-bit SSL encryption Resolution Video and mouse synchronization Security NOTE: This equipment complies with the requirements of European EMC directive 89/336 EEC in respect of EN55022 Class B, EN 50082-1 and EN 60555-2. [. . . ] A User only has this option if another User is using the current session. A User does not have the option to take over an Administrators session. You have the option to Take Over, View Only or Cancel. Moving or hiding the Toolbar The toolbar can be dragged and dropped anywhere on the screen, by clicking and dragging the logo. To hide the Toolbar, either: Double click the Voyager IPs system tray icon . Alternatively, press F9 to display the toolbar and repeat the steps above. To minimize the Toolbar click the arrow. Vertical Offset - defines the vertical starting position of the displayed image. Phase - defines the point at which each pixel is sampled. Noise Level - represents the Video "noise" when a static screen is displayed. Automated adjust ­ When checked, the video adjusts automatically whenever there is a change in the screen resolution. Brightness / Contrast - use the scales to adjust the brightness and contrast of Auto Video Adjust To Adjust the video automatically, open a Windows Explorer (or similar) in the background, click Auto Video Adjust. If the process runs more than three times, then there is an abnormal noise level. Check the video cable and ensure that there is no dynamic video application running on the Target Servers desktop. Perform as necessary for each Target server or screen resolution. Power Cycle The optional KB-Power and KB-Power IPMI offer remote power control via a remote session. To shut down and restart the Target Server via KB-Power / KB-Power IPMI, from the toolbar click the Power icon. A prompt appears, click Yes to continue. Only an administrator can initiate a hard reset command. The Power Management Console can be accessed when the Power Management Console is activated. Keyboard key sequences Click the Keyboard icon. A list of defined keyboard sequences appears, when clicked these will be transmitted to the Target Server and will not affect the client computer. For example, select Ctrl-Alt-Del to send this three key sequence to the Target Server. To add a keyboard sequence, Click Add/Remove, the Special Key Manager box appears. To add a predefined sequence: Figure 12 ­ Special key Manager Box. Click Add Predefined, a list of sequences appears. [. . . ] From the menu, choose Restore Factory Settings. Click Reboot to restart the unit Video resolution and refresh rates Hz 640x480 720x400 800x600 1024x768 1152x864 1152x900 1280x720 1280x768 1280x960 1280x1024 1600x1200 56 60 65 66 70 72 73 75 76 85 86 Voyager IP 12 User Guide Service Information Technical Support If you cannot determine the nature of a problem, please call Daxten and ask for Technical Support. If possible, call from a phone located near the unit, as we may be able to solve your problem directly over the phone. If we cannot solve your problem, and determine that the fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must appear on the outside of all returned products. [. . . ]