User manual DAXTEN Z-SERIES BROCHURE

[. . . ] Copyright © 2002 Raritan Computer, Inc. Z4200U-0C April 2002 Raritan Computer Inc. 400 Cottontail Lane Somerset, NJ 08873 USA Tel. 1-732-764-8887 E-mail: sales@raritan. com http://www. raritan. com Raritan Computer Europe, B. V. [. . . ] The bottom of the OSUI menu indicates that the Scan function is ON when the word "Scan" is highlighted in yellow. Reset User Station - Reloads USTS ­ searches all connected Z-CIMs, updating all user names and IDs Exit the OSUI <F3> <F4> <F6> <F11> <Esc> Help Menu The Help Menu (Figure 8) lists all the functions keys for quick and easy reference. Figure 8. [F1] Help Menu 10 Operating Z4200U Selection Menu The Selection Menu (Figure 9) lists channels, serial numbers, scan rates, and the number of servers currently detected by the system, sorted by computer name in alphabetical order. Use the <>, <>, <PageUp> or <PageDown> keys to select a channel. Press <Enter> to switch to the selected computer/channel. Figure 9. [F2] Selection Menu Alternatively, you may switch between computers without using the OSUI, by using the UP and DOWN buttons in the front of the USTS user station. These buttons switch between computers by name in alphabetical order: UP switches to the previous computer by name in alphabetical order; DOWN switches to the next computer by name in alphabetical order. Edit Menu The Edit Menu <F3> (Figure 10) can be used to make changes to the computer channel name and its scan ratethe time interval, in seconds, that a channel's computer is to remain displayed on monitor during scanning. It can also be used to designate a channel as a <Home> computer. Press < >, < >, <>, or <> to highlight (in yellow) the field to be edited 2. Press the <Home> key if you wish to designate this computer/channel as your home computer. An "H" will appear in the right most column. This designation will enable the user to quickly select or switch directly to the home computer. At the Selection Menu, pressing the <Home> key once highlights the home channel. With no OSUI displayed, rapidly pressing the <Home> key twice automatically switches the user to the computer designated as the home computer. Press <S> to save changes and exit, or <ESC> and then <N> to exit without saving changes. Press <F2> to return to Selection Menu. Verify that new name appears on Selection Menu in green. Figure 10. [F3] Edit Menu Operating Z4200U 11 System Profile Menu The System Profile Menu <F4> (Figure 11) can be used to make changes to parameters that effect overall system functionality. Select fields to be edited by pressing <Tab> (moves forward) <Shift-Tab> (moves backward), < >, < >, < >, or < > keys to move to desired field. Use the < >, < > keys to select choices in each field or make entries as explained below. Press <Enter> when editing is done. Highlighted area will turn from green to yellow. [. . . ] See also Channel. There are up to 42 "channels" in a Z-series configuration. A channel represents the path to a certain computer on the Selection Menu. See also Active Channel and Inactive Channel. A label of up to 12 characters assigned by an administrator for a device connected to a Z-Series channel. For editing computer names, changing channel scan times, and assigning a home channel. [. . . ]