User manual DCS (AUDIO) QUICK SETUP VERDIDELIUS

[. . . ] Quick Set-Up Guide ­ dCS Verdi with dCS Delius This sheet guides you through setting up Verdi and Delius to play CDs and SACDs. [. . . ] WHEN OPEN, DO NOT STARE INTO BEAM. CLASS 1 LASER PRODUCT CH1 AES 1 AES 2 AES 3 RCA BNC TOSLINK ST CH2 SUC SDIF IN - WORDCLOCK - OUT 1394 1 XLR cable ANALOGUE OUTPUTS L R L AES1 PUSH BNC cable DIGITAL INPUTS AES2 PUSH 1394 cable DIGITAL OUT POWER SUC REC dCS Delius DAC RCA1 ST BNC R RCA2 TOSLINK IN - WORDCLOCK - OUT 1394 1 R R L RCA phono XLR L cables cables Balanced Unbalanced - or - Outputs Outputs To Power Amplifier or Preamplifier do this: Once the set-up is complete, load a disc, press the Play button and adjust Delius' Volume control. The system will automatically select the CD data if you are playing a CD (Delius displays 16/44. 1) or the SACD data if you are playing an SACD / hybrid disc (Delius displays Verdi). That is all you need to do, except - enjoy the music! Quick Setup - Verdi-Delius12. doc October 2002 Adding an Upsampler You can use a dCS Purcell Upsampler fitted with a 1394 interface and v2. 2x software to upsample the CD data to DSD. do this: Connect power cables to all units, press the Power buttons. The first time you use this set-up, run these reset routines: do this: For Verdi, press the Menu button on the front panel, press the Step button repeatedly until the display shows Factory ­ press the Menu button. Wait 30 seconds for the unit to settle down. For Purcell, press the Function button on the front panel, press the Step button repeatedly until the display shows Factory ­ press the Function button. Wait 30 seconds for the unit to settle down. [. . . ] That is all you need to do, except - enjoy the music! [. . . ]