User manual DE DIETRICH DHD1128X

[. . . ] (If they are not fastened securely enough, the TV may tilt forward after being installed. ) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. tidying cables (Only LA61**) 1 Use Cable Holder to neatly secure and position cables together. 2 Fix the Cable Management firmly to the TV. [. . . ] Yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. Yy The available menus and options may differ from the input source or product model that you are using. Yy New features may be added to this TV in the future. Yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. Yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. (Depending on model) ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. Yy It is recommended to move the TV in the box or packing material that the TV originally came in. Yy Before moving or lifting the TV, disconnect the power cord and all cables. Yy When holding the TV, the screen should face away from you to avoid damage. Yy When transporting the TV, do not expose the TV to jolts or excessive vibration. Yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Yy Do not apply excessive pressure to cause flexing/bending of  frame chassis as it may damage screen. Yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. ASSEMBLING AND PREPARING 17 Mounting on a table 1 Lift and tilt the TV into its upright position on a table. --  eave a 10 cm (minimum) space from the L wall for proper ventilation. Adjusting the angle of the TV to suit view (Only LA61**) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. [. . . ] Yy Audio with ACP (Audio Copy Protection) function may block digital audio output. English Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the MY MEDIA menu to use various multimedia files. English View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. [. . . ]