User manual DE DIETRICH DHD1300X

[. . . ] Dear valued customer, dE 68 To discover a De Dietrich product is to experience the range of unique emotions which only high-value items can produce. The attraction is immediate, from the moment you set eyes on the product. The sheer quality of the design shines through thanks to the timeless style and outstanding finishes which make each appliance an elegant and refined little masterpiece in its own right, each in perfect harmony with the others. Next, comes the irresistible urge to touch it. [. . . ] - Install the hood at a safe distance of at least 70 cm from an electric, gas or combined cooking hob. If you possess an outlet to the exterior Your hood can be connected to this outlet Using a flue (minimum diameter 125 mm that is If your flue is less than 125 mm in diameter, you must use the recy- If you do not possess an outlet to the exterior (fig. 2) All of our appliances can be used in recycling mode. In this case, you should add an active carbon filter which will keep in odours. During installation and maintenance operations, the appliance must be unplugged from the electrical grid; fuses must be cut off or removed. Carry out the electrical connection after assembly and mounting are completed. Ensure that: - the electrical installation has sufficient voltage, - the electrical wires are in good condition, - the diameter of the wires complies with the installation requirements. warning This appliance is delivered with a H 05 VVF power cord that has three-0. 75 mm2 conductors (neutral , phase and ground). It must be connected to the main power supply (which should be a 220-240 V single phase current) via a CEI 60083 standardised socket that should remain accessible after installation, in keeping with installation guidelines. We cannot be held responsible for any accident resulting from an inexistent, defective or incorrect ground lead. The fuse for your installation must be 10 or 16A. If the power cable is damaged, call the after-sales service department in order to avoid danger. warning If the electrical installation at your residence requires any changes in order to hook up your appliance, call upon a professional electrician. warning If the hood displays any malfunctions, unplug the appliance or remove the fuse corresponding to the electrical socket where your appliance is plugged in. The hood must be installed in compliance with all applicable regulations concerning the ventilation of premises. In France these regulations are described in DTU 61. In particular, the evacuated air should never be conveyed to a duct used to evacuate smoke from appliances that use gas or other combustible fuels. Unused ducts may only be used after approval from a competent specialist. The minimum distance between the cooking surface and the lowest part of the hood must be 70 cm. If the instructions for the hob installed under the hood specify a distance of more than 70 cm, this requirement must be respected. -- Draw a horizontal line 70 cm minimum from the cooker top (A/fig. [. . . ] Selection of the hob type in automatic mode * To select your hob type, the hood should be switched off. Press and hold for longer than 2 seconds, to enter configuration mode. Press to select the hob type: The default setting I (induction hob) flashes; another press and the display shows U for a ceramic hob and another press displays G for gas. After 10 seconds, medium sensitivity will be selected automatically. [. . . ]