User manual DE DIETRICH DOP1180B

[. . . ] You can find a full range of information about the brand at www. Com Visit the De Dietrich Gallery, 6 rue de la Pépinière (Paris eighth district) Open from Tuesday to Saturday from 10 am to 7 pm Customer service department: 0892 02 88 04 A Cooking modes display B Cooking time indicator C Cooking time/timer display D Timer indicator E End of cooking time indicator F Clock display G Temperature rise indicator H Shelf support indicator I Control panel lock indicator (child safety A Temperature adjustment button B Time setting button for cooking time, end of cooking time and timer C Stop button How to set the time 2 -Set the time using the control knob. Button down for a few Seconds until the display flashes and then A beep indicates that the time may now be 5 -Adjust the time, using the knob. If the setting is not confirmed, it will register automatically after a few seconds. [. . . ] - a series of beeps sounds for a few secondes. The beeps can be stopped by pressing any button. Select the cooking function: If you wish to customise the recommended temperature: - Press the touch control until the °C flashing. - Your oven's programmer can be used as an Independent timer that allows you to count Down a time without using the oven. In that case, the timer display takes priority over the clock display. The display stops flashing after a few seconds and the timer starts to run, counting down the time in seconds. Once the time has elapsed, the timer emits a series of beeps to let you know. The beeps can be stopped by pressing any button. It is possible to change or cancel at any time the Timer by pressing the button You have the option of preventing access to The oven controls by taking the following 1 when the oven is off, press and hold the STOP and buttons for a few seconds. The oven controls are once again accessible. - After 4 minutes with no action by the user, the oven display returns to standby . To reactivate the display, use the function selector. - The oven display is active once again and cooking is now possible. "Resetting the time") then confirm. 2 - Adjust the contrast, using the control knob - Adjust the time to 0:00 (see section "Resetting the time") then confirm. For 10 seconds until "DEMO" is shown in the To exit from DEMO mode: Set the time to 0:00. Buttons simultaneously for 10 seconds until When the oven is in demo mode, the heating elements are inactive. Cooking is controlled by the heating element at the bottom of the oven and by the Rapid temperature increase: Some dishes can be placed in the oven while it is still This is recommended to retain moisture in white meat, fish and vegetables. Cooking controlled by the upper and lower heating elements and by the fan. Three combined sources of heat: a lot of heat from the bottom, a little circulating heat and a touch from the grill for browning. Recommended for quiches, pies, tarts with juicy fruits, preferably in an earthenware dish. Cooking controlled by the upper and lower heating elements and by the fan. [. . . ] The oven is clean and once again ready for the cooking application of your choice. - Follow the instructions described in the "Pro- Before confirming the pyrolysis cycle Of cooking time indicator starts to flash. - The end of cooking time flashes to in2 dicate that it may now be set. - Using the control knob, adjust the end of cooking time. [. . . ]