User manual DE DIETRICH DOP460XH1

[. . . ] How do you program for immediate cooking?How How How How How How How do do do do do do do you you you you you you you set a cooking programme?Lock the controls (child safety device)?40-41 Oven cooking modes How do you clean the cavity of your oven? [. . . ] Useful dimensions for installing your oven GB 50 x 50 mm cut-out Location of retaining screw Location of retaining screw 70 550 The oven can be installed under a work top or in a column of cabinetry (open* or closed) having the appropriate dimensions for built-in installation (see adjacent diagram). Your oven has optimised air circulation that allows it to achieve remarkable cooking and cleaning results if the following guidelines are respected: • Centre the oven in the cabinet so as to guarantee a minimum distance of 5 mm between the appliance and the neighbouring cabinet. € The material of the built-in cabinetry must be heat resistant (or be covered with such a material). € For greater stability, attach the oven in the cabinet with two screws through the holes provided for this purpose on either side of the front inner panel (see diagram). To do this: 1) Remove the rubber screw covers to access the mounting holes. 2) Drill a Ø 3 mm hole in the cabinet panel to avoid splitting the wood. 4) Replace the rubber screw covers (they also serve to absorb the shock caused by closing the oven door). (*) If the cabinet is open, its opening must be 70 mm (maximum). To be certain that you have properly installed your appliance, do not hesitate to call on a household appliance specialist. Qxd 06/06/05 10:07 Page 32 How do you use your oven?Close-up of your programmer 9 2 1 11 3 4 1 2 3 4 5 6 7 8 9 10 11 32 6 10 8 Clock or timer display Cooking mode display 7 5 Shelf support indicator and selected cooking mode indicator Display of various time adjustment programmes (cooking times and end times) Oven temperature display Locked door indicator (during pyrolysis) Rising temperature indicator Timer indicator Pyrolysis indicator Control lock indicator (child safety device) "Low Temperature Cooking" indicator 99633803_ML_A. After a cooking cycle, the circulating fan continues to function for a period in order to cool the oven. The cooking time flashes 0:00 to indicate that it is now possible to set it. Turn the button to set the desired time. The cooking time starts counting down as soon as the time has been entered. You can cancel the function at any time by setting the displayed value to 0 (after having pressed the touch control ). b) With delayed start (choose end time) Proceed as with programmed cooking. After setting the cooking time, press two times so that the end time begins flashing. Turn the selector button toward + or - to set the desired end of cooking time. How do you set a low temperature cooking programme?You will see the “ ” symbol 2. Press again to choose the cooking option from the following list by turning the selector button (to make this selection, refer to the attached cooking guide): · Yoghurt Enter your selection by pressing the button. [. . . ] notes: The cleaning temperature cannot be adjusted. During the pyrolysis cycle, the oven lighting is off. If your oven is not clean after a pyrolysis cycle, you waited too long to launch the cleaning cycle. 2) How do you program for delayed pyrolysis? [. . . ]