User manual DE DIETRICH DPI7686XP

[. . . ] The attraction is immediate from the moment you set eyes on the product. The sheer quality of the design shines through, thanks to the timeless style and outstanding finishes which make each component an elegant and refined masterpiece in its own right, each one in perfect harmony with the others. Next, comes the irresistible urge to touch it. De Dietrich’s design makes extensive use of robust and prestigious materials. [. . . ] It can be used as soon as the cooking zone is turned on. In this case you can enter the figures for the desired time directly, one after the other. Pressing the «0» key switches off the timer. To make setting a very long time easier, you can go straight to 99 minutes by pressing the – touchkey. At the end of cooking, the display indicates 0 and a warning beep sounds. To cancel this information, press any button for the particular cooking zone being used. Otherwise, they will switch off after a few seconds. To stop the timer during cooking, press the + and - keys at the same time or return to 0 using the - key or enter "0" on the numeric keypad. Independent timer This function allows you to time an event, without cooking. - Select a cooking zone you are not using (2. The free zone is selected with touchkey d (2. The power and timer are adjusted as for a normal cooking zone. To switch the zone off, press and hold key d , a long beep sounds and the displays go off or the "H" symbol 26 • 2 USE - Set the time with touchpad g . - At the end of your adjustment “t” becomes becomes fixed and the count begins. Note: You can stop a count in progress by keeping your finger on the touchpad of the selection on the display. 8 ELAPSED TIME key This function displays the time since the power setting was last changed for a selected cooking zone. The elapsed time flashes in the selected zone's timer display (2. If you want cooking to end within a specific time, press the i key and then, within 5 seconds, press + on the timer to increase the desired cooking time. The elapsed time is displayed fixed for 3 seconds and then the remaining time is displayed. This function is available with or without the timer function. Note: if the timer is showing a time, it is not possible to change it within 5 and allow the hob or a cooking zone to be switched off. Locking Press b key (cadenas), until the "bloc" locking symbol appears in one of the displays and a beep confirms the operation (2. [. . . ] The electronic circuit does not operate properly. call the After-Sales Service Department. The hob does not work, the "bloc" information is displayed. Fault code F0: temperature is below 5°C. [. . . ]