User manual DE DIETRICH DRN1027IS

[. . . ] 91 Cabot Court Hauppauge, NY 11788 Telephone:631-434-1600 Fax:631-434-3198 Tech Support:631-434-3197 Hours: M-F 9:00AM to 6:30PM EST Telephone:0207-378-1997 Fax:0207-357-9171 Tech Support:0207-378-0202 Audio can be supplied to the HD PVR from a set of stereo audio cables or via an optical SPDIF. The optical audio input to the HD PVR can be in either a 2 channel stereo audio format or a 2 or 5. 1 channel AC-3 format. The recording format used by HD PVR is H. 264 video with AC-3 audio. HD PVR recordings can be played back to the PC screen or can be converted "on the fly" to a Blu-ray format AVCHD file for burning onto a DVD disk. [. . . ] Insert the WinTV Installation CD-ROM in your PC's CD-ROM drive. entitled Configuring the IR Blaster. Running Arcsoft TotalMedia Extreme To start the ArcSoft Total Media Extreme application, double click on the TotalMedia Extreme icon on your desktop. N ote: if the CD does not autorun, navigate to the CD and run the 'Setup. exe' file. "Hauppauge WinTV Installation CD-ROM" window will appear on the screen. Install the HD PVR driver Click the button labeled Step 1: Install Drivers. A blue screen will open and begin installing the drivers for your WinTV. Once the drivers have installed, click on the Finish bar to exit. Install the HD PVR application Click the button labeled Step 2: Install software Choose a language, and click next, click Install. The Arcsoft Total Media Extreme software application, HD PVR Scheduler application, and IR Blaster application will be installed. The program will open to this initial screen which has four icons along the top. Recording Videos Click on the video cassette icon to open the Arcsoft Capture Module recording function. Make sure the Source is set to Hauppauge HD PVR Capture. Playing back your video recordings To play back a file, close the Arcsoft Capture Module recording window and click on the Play Video icon. Select your A/V input source Choose the Video and Audio inputs you are using to setup up the recording: If you are using Component video from your set top box, choose Component. If you are using S-Video or Composite video from your set top box, choose S-Video or Composite. ote: if you are connecting HD PVR to a game console, make sure the Component video output of the game console is set to 1080i. N N ote: the latest driver updates are available at: www. hauppauge. com in the Support section. Step 6: Install the IR Blaster cable (optional for use with a cable TV or satellite receiver box) Plug in the IR blaster cable: plug the jack at the end of the IR RemoteBlaster cable into the IR receiver jack on the HD PVR. Install the IR transmitter (blaster) at your set top box: Attach the end of the IR transmitter over the remote sensor on the set top box to be controlled. Placement of the IR transmitter is important!The IR transmitter only works over a 1 inch distance, so you need to make sure it is placed over the remote sensor in your set top box. Some set top boxes have the position of the remote receiver indicated on the plastic front of the set top box. Click on the Video button to add a recording you have previously made. Click on Capture Video to capture a new video to the hard disk for editing and burning. There are also options for adding a submenu and custom text. When the conversion process completes, it will display the results. Utilities: Arcsoft Media Converter Click the Utilities option from the main menu, then choose Arcsoft MediaConverter Configuring the IR Blaster The IR Blaster lets the HD PVR change the channel on a satellite or cable TV set top box by transmitting `channel change' commands to the box via an Infra Red (IR) transmitter. The IR Blaster consists of two components: 1. This cable has an IR cable jack and an IR transmitter. The IR cable jack plugs into the back of the HD PVR, and the IR transmitter needs to be positioned over the IR receiver on your set top box using the self stick tape supplied on the front of the transmitter. IR Blaster Config program (BlasterCfg. EXE) for configuring the codes for the IR transmitter. Learning a new set top box remote control code If you have a set top box that is not part of the Hauppauge IR Blaster preset codes and the Scan function does not work, you can add a new set top box by using the Learn function. To access the learn function, click on Advanced config, and then click Learn. To learn the new keys: hold the remote control from your set top box as close to the IR receiver and learn sensor as possible. a 45 degree angle, as seen above is helpful in the Blaster Configuration program, click the button you would like to learn (for example: 1) then depress and hold the corresponding key on your set top box remote control. [. . . ] There might be as many as ten codes for the Vendor chosen. To determine the correct CodeSet for your set top box: On Blaster Config, click the Power On/Off button. You should see the IR transmitter blink after each click of the Power On/Off button. If your set top box turns on or off, then this code is the correct one for your set top box. [. . . ]