User manual DE DIETRICH DWD1194GX

[. . . ] 15 Constant humidity (Dynamic cooling) button m . 15 Air filtering with the active charcoal filter . 20 Cleaning the outer casing, the interior and accessories . 21 Metal grille at the back of the appliance . [. . . ] ^ Insert the labels from above into the front of the shelves. Additional labels can be purchased from your Miele Dealer or the Miele Spare Parts Department. Maximum capacity The following data was obtained using standard Bordeaux wine bottles (0. 75 l) and the number of shelves supplied with the appliance. ­ KWL 4712 S ed: up to 162 bottles ­ KWL 4912 S ed: up to 187 bottles Door lock You can lock the door of the wine storage unit to prevent it being opened without your knowledge. ^ Press it down and turn it 90° until the door lock engages. To unlock the appliance, carry out the procedure in the reverse order but turn the key in the opposite direction. 17 Alarm Your appliance is fitted with a warning system which ensures that the temperature cannot rise or fall unnoticed and impair the wine. Activating the alarm system The alarm system is always active. It does not have to be switched on manually. Temperature alarm The alarm will sound if the temperature in the appliance rises approx. The temperature display will flash at the same time. The alarm will sound and the temperature display will flash: ­ when you switch the appliance on, and for as long as the temperature differs as described above from the temperature set. ­ if the door has been left open for a while in order to re-arrange or take wine bottles out and warm air has entered the appliance. ­ if a large number of wine bottles are put into the storage unit at once. ­ if there has been a lengthy interruption to the power supply. Switching the alarm off early Once the set temperature has been reached in the appliance, the alarm stops and the temperature display lights up constantly. ^ After cleaning, wipe the interior and accessories with a damp cloth, and dry with a soft cloth. Leave the door open to air the appliance for a short while. E-Cloth ^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. 20 Cleaning and care Ventilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance. Active charcoal filter Replace the active charcoal filter with a new one once a year. Active charcoal filters are available from your Miele Dealer or the Miele Spare Parts Department. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. The door seal should be cleaned regularly with clean water and then wiped dry with a soft cloth. ^ Turn the filter 90° clockwise or anti-clockwise. ^ Insert a new filter with the handle in the vertical position. ^ Turn the filter 90° clockwise or anti-clockwise until it clicks into position. Metal grille at the back of the appliance The metal grille at the back of the appliance (heat exchanger) should be dusted at least once a year. A build-up of dust will increase the energy consumption of the appliance. When cleaning the grille, make sure that the pipework and other components do not get broken or damaged in any way. After cleaning ^ Replace all shelves and accessories in the appliance. ^ Insert the plug in the socket and switch the appliance back on. 21 Problem solving guide Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. [. . . ] ^ Screw hinge bracket h into the opposite side. ^ Turn cover g through 180°, and fit it on the other side. ^ Remove plug m from the top of the door and refit on the opposite side. ^ Unscrew screw a out of lower hinge bracket b. [. . . ]