User manual DELL INSPIRON 1200

[. . . ] DellTM InspironTM 1200 and 2200 Owner's Manual Model PP10S w w w. c o m Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. If you purchased a DellTM n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable. ____________________ Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of Dell Inc. [. . . ] An ad-hoc network does not use routers or access points and consists of computers that broadcast to one another. For additional assistance with setting up your wireless connection, go to support. dell. com and search for the keyword wireless setup. infrastructure network ad-hoc network Connecting to a Wireless Network in Microsoft® Windows® XP Your wireless network card requires specific software and drivers in order to connect to a network. If the software is removed or corrupted, follow the instructions included in the user's guide for your wireless network card. The user's guide is available on the Dell Support website at support. dell. com. 48 Setting Up a Network When you turn on your computer, a pop-up appears from the network icon in the notification area (located in the lower-right corner of the Windows desktop) whenever a network, for which your computer is not configured, is detected in the area. 1 Click either the pop-up or the network icon to configure your computer for one of the available wireless networks. The Wireless Network Connections window lists the wireless networks available in your area. Setting Up a Network 49 www. dell. com | support. dell. com 2 Click to select the network you want to configure, and then click Connect or double-click the network name in the list. If you select a secure network (identified by a icon), you must enter a WEP or WPA key when prompted. NOTE: Network security settings are unique to your network. Your network is configured automatically. NOTE: Your computer can take up to 1 minute to connect to the network. After your computer is configured for the wireless network you selected, another pop-up notifies you that your computer is connected to the network you selected. Thereafter, whenever you log on to your computer in the area of the wireless network, the same pop-up notifies you of the wireless network connection. 50 Setting Up a Network Solving Problems Dell Diagnostics CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. When to Use the Dell Diagnostics If you experience a problem with your computer, perform the checks in this chapter and run the Dell Diagnostics before you contact Dell for technical assistance. NOTICE: The Dell Diagnostics works only on DellTM computers. The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive. NOTE: If your computer cannot display a screen image, contact Dell (see page 91). 2 Connect the computer to an electrical outlet. When the DELLTM logo appears, press <F12> immediately. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then shut down your computer and try again. The one-time boot menu displays with a list of bootable devices. 4 Use the down-arrow key to select Diagnostics and press <Enter> to start the Dell Diagnostics from the diagnostics utility partition on your hard drive. NOTE: If the boot device list does not display and the screen is blank, press the <End> key. Then press the <Enter> key to begin the Dell Diagnostics. · · During the assessment, answer any questions that appear. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. [. . . ]