User manual DELONGHI ADS 3500

[. . . ] Turn the appliance on when in the working position only. The appliance must be powered with alternating current at the voltage given on the rating plate under the ironing board only. The wall socket and extension cable must support 16A and must be efficiently earthed. [. . . ] Some parts of the board, especially those next 6 to the ironing surface, become very hot. The iron's steam generator must be filled only after having unplugged the board from the power socket. Never expose the appliance to the elements (rain, sun, etc. ). The closed board may not be perfectly stable if placed vertically. To store it vertically, it should be rested against a wall. Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. DESCRIPTION A. Vacuum and blowing selection switch (certain models only) C. Socket for iron The board cover provided varies according to the model of appliance. In models with a single button, the ironing board cover reflects the heat with metal fibres which distribute the heat of the iron across the board. In the model with double button, the ironing board cover has a heat resistant strip where you can rest the iron while ironing (fig. 5). AFTER IRONING · When you have finished ironing, leave the ironing board on to eliminate all traces of moisture from the board and thus extend the working life of your appliance. · Unplug the ironing board from the mains socket. OPENING THE BOARD (FIG. 1, 2) Hold the front leg of the board in place on the floor with your foot, press the board release lever and at the same time rotate the board until you reach the desired height. Once the board is at the right height, release the lever. Before letting go of the board, release the lever and make sure the pin is securely lodged in one of the positions provided. When the board is completely open, remove your foot from the leg of the board. Once open, the board can be easily moved (fig. [. . . ] Switch the iron or ironing system on, following the manufacturer's instructions. When the iron is ready, you can start ironing. Models with double button: The board must be switched on at least 5 minutes before starting ironing to allow it to heat up. [. . . ]