User manual DELONGHI BAR32

[. . . ] EC190/200 GB 2-01-2003 10:24 Pagina 6 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: · Read all instructions. · To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in water or other liquid. · Never allow the appliance to be used by children or unfit persons. · Unplug from the outlet when not in use and before cleaning. [. . . ] Following this procedure ensures that the coffee is delivered at a hotter temperature, as well as guaranteeing that the seal of the filter holder gaskets is more effective. · Press the filter holder button and insert the pod into the filter (fig 15). Note: Use pods which conform to the ESE standard: this will be indicated on the packaging by the following symbol: Note: use high quality, finely-ground coffee for espresso coffee makers. 2. Distribute the ground coffee uniformly and press it lightly with the pressing pad (Fig. 3. Remove any excess coffee from around the edges of the filter. 4. Place the cup or cups (cups can be preheated by rinsing under hot water) on the black part of the removable drip 8 The ESE standard is a system accepted by the leading coffee pod manufacturers, and allows espresso coffee to be prepared simply and without any mess. EC190/200 GB 2-01-2003 10:24 Pagina 9 3. Attach the filter holder onto the machine, moving from left to right (fig 6). IMPORTANT: Should the coffee holder for pods be used after one for ground coffee, it's necessary to clear the ground coffee remained in the espresso boiler outlet. This cleaning operation is necessary in order to avoid water leackages from the coffee holder for pods while coffee is being proposed. 4. Proceed as in points 4, 5 and 6 in the previous section on how to prepare espresso. 5. To remove the pod, press the button on the filter holder and simply lift the pod out 6. To turn the coffee machine off, turn the selector knob on the appliance to the Off position "O" (fig. 14). If you use the "iIIycaffe" coffee pods, use the special filter holder. Insert the coffee pod ensuring the name "iIIy" is facing down and the long side of the pod is positioned as shown in figure. been reached (the ideal temperature is 60°C), stop the delivery of steam by turning the steam knob in a clockwise direction and at the same time positioning the selector knob at "O" (fig. 7. Pour the frothed milk into the cups containing the espresso coffee. Add sugar to taste and, if desired, sprinkle a little powdered chocolate on top of the froth. 4. Position the container with the milk in it under the milk frother (fig. 5. Immerse the cappuccino maker nozzle about 5mm deep into the milk and turn the steam knob in an anti-clockwise direction (fig. 18) (by turning the knob to a greater or lesser extent, it is possible to vary the quantity of steam that comes out from the cappuccino maker). At this point, the milk will begin to increase in volume and to appear frothy. 6. When the volume of the milk has doubled, fully immerse the milk frother and continue heating the milk (Fig. Once the desired temperature has CLEANING AND MAINTENANCE 1. Before performing cleaning or maintenance operations, turn the machine off, allow it to cool down and unplug it from the power outlet. Warning: when cleaning, never immerse the machine in water: it is an electrical appliance! 9 EC190/200 GB 2-01-2003 10:24 Pagina 10 CLEANING THE FILTER HOLDER FOR GROUND COFFEE Every so often, the filter holder for ground coffee should be cleaned, as follows: - Remove the filter for coffee powder with creamer - Clean the inside of the filter holder. [. . . ] · The cappuccino maker is dirty. The milk does not froth when making a cappuccino. · Always use milk at refrigerator tem perature. · Clean the holes of the cappucino maker, especially those shown in fig. 21 11 EC190/200 GB 2-01-2003 10:24 Pagina 12 What Does This Warraty Cover?We warrant each Espresso Coffee Machine to be free from defects in material and workmanship. [. . . ]