User manual DELONGHI BBH 100EX:1

[. . . ] Arrange cord away from traffic area and where it will not be tripped over. To disconnect heater, turn controls to off, then remove plug from outlet. Connect to properly polarized outlets only. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage the heater. [. . . ] Make sure that the room in which the appliance is located is well ventilated during this operation. It is normal for the appliance to emit small cracking sounds. It is not advisable for the appliance to be positioned where it is exposed to draughts which might prevent it from working properly. SAVE THESE INSTRUCTIONS 3 HOW TO USE YOUR HEATER Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. LOCATION Place heater on floor beneath coldest window in the room or any desired location. Your heater will minimize the effect of cold drafts. The heater must not be located immediately below a socket-outlet. FASTENING THE FEET Remove the feet and the fastening screws from the bag. Turn the appliance upside-down on a soft surface, to avoid ruining the paintwork. Insert the feet as shown in the figure 1, making sure they are inserted completely: the teeth A at the bottom must be coupled to the feet. Finally, fasten the feet using the two screws. A A FIG. CONNECTION The heater must be connected to a properly polarized A/C 110/120 V household outlet in perfect working conditions. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fitted in. 2) foot switches · Turn the thermostat knob in a clockwise direction until it reaches the maximum setting. · Heating at full power: press both the foot switches (min + med). · Heating at medium power: press only the FIG. Only the light "med" will come on. · Heating at minium power: press only the foot switch "min". Only the light "min" will come on. [. . . ] Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www. delonghi. com. Residents of Mexico: Please refer to the Limited Warranty statement for Mexico. Please refer to the back page of the manual for De'Longhi addresses. The above warranty is in lieu of all other express warranties and representations. [. . . ]