User manual DELONGHI DNC60

[. . . ] Deflector with fin manually adjustable to three positions (the deflector should not be moved manually while the appliance is swinging). Anti-allergen/anti-microbial enzyme light The blue light comes on when the appliance is in operation. Water level viewing window Minimum dehumidification light (silent operation) Complete deflector swing light Delayed shutdown light (2/4/8 hours) Maximum dehumidification light (for rapid dehumidification) Automatic dehumidification light (to maintain a comfortable level of humidity) Alarm light (see troubleshooting) Tank full/tank absent light (flashes when the tank is full or incorrectly positioned) Use this appliance only as described in this instruction manual. ⷠAs with all electrical equipment, whilst the instructions aim to cover as many eventualities as possible, caution and common sense should be applied when operating and installing this appliance. [. . . ] ⷠThe power socket and electrical circuit are adequate for the appliance. If this is not the case, have the plug replaced by a qualified electrician; · Failure to do so would obstruct ventilation, jeopardising correct operation of the appliance. 20cm or more 5 cm or more You should keep all doors and windows closed while the appliance is in operation. If doors and windows are opened, the temperature and humidity in the room may change and it could therefore require longer to dehumidify the room. With temperatures of less than 1 °C or above 40 °C, dehumidification is automatically deactivated and the appliance switches to fan only mode. If the humidity is lower than 20%, the safety circuit triggers automatically and the dehumidifier shuts down to avoid damage. Even when the room is dehumidified, condensation and mould may form externally or in poorly ventilated points, for example behind furniture. Each time you press the dehumidification button ( the relative indicator light comes on (AUTO, MAX, MIN). Important: Wait two minutes before unplugging the appliance from the mains as the fan continues to operate for about two minutes after the appliance has been turned off to cool the heating element. ) Note: The humidity level is maintained at around 55% in Auto mode and the appliance therefore comes on and goes off automatically. (When a humidity of 55% is reached , the appliance switches into fan mode. ) Setting the timer Before using this function, make sure the appliance is on. Each time you press the TIMER button, the timer setting is changed (2, 4, 8 hours). The timer indicator lights come on in sequence as the time goes by to indicate the time left. When the timer is set, even if the tank full light is flashing, after emptying and repositioning the tank, the appliance continues to operate for the time left. Emission of negative ions Before using this function, make sure the appliance is on. The negative ions indicator light comes on and the appliance emits negative ions from the air outlet grille. A large quantity of negative ions are produced, quantitatively similar to those present in environments such as forests or waterfalls. These are microscopic particles which create a negative electrical field in the air. Make sure the "tank full/tank missing" light is off. The deflector opens completely and the appliance comes on in automatic mode. (The Auto light comes on, together with the anti-allergens/anti-microbial enzyme light against allergens and the propagation of mould and bacteria. [. . . ] Never wash the filter with water to avoid removing the bactericide extracts of green tea and catechin. After having unplugged the appliance from the power socket, empty the tank. Cover the appliance with a plastic bag to protect it from dust. Clean the appliance using a damp cloth then dry with a dry cloth. [. . . ]