User manual DELONGHI EW 6507

[. . . ] Always unplug the heater when it is not in use. Do not operate your heater when its cord or plug has been damaged or after it has malfunctioned, has been dropped or damaged in any manner. If you notice any leakage of oil, switch it off immediately and contact a service center as indicated in these instructions. Your heater should not be operated outdoors. [. . . ] Turn the radiator back to its upright position. BE CAREFUL Operate the heater in upright position only (wheels on the bottom, controls on the top). Any other position could create hazard situation!WATTS ECONOMIZER For more economical use, the Min. Watt switches may be used individually, after unit has reached the operating temperature. LOCATION Place heater on floor beneath coldest window in the room or any desired location. Your heater will minimize the effect of cold drafts. The heater must not be located immediately below a socket-outlet. Do not use this radiator in rooms having a surface area less than 4 m2. CONNECTION The radiator must be connected to a properly polarized A/C 115/220 V (check the voltage on the label positioned on the cable) household outlet in perfect working conditions. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fitted in. The lights on the switches remain on indipendent of the cycling of the thermostat. When room reaches desired temperature, turn the thermostat knob counter clockwise very slowly and carefully until you hear a "click". This will automatically set your unit to cycle on and off at that desired heat setting. USE OF THERMOSTAT The thermostat operates on room air temperature and not radiator temperature. Counter clockwise direction - lower number, lower temperature. Clockwise direction- higher number, higher temperature. The appliance will maintain a minimum room temperature of approximately 5°C thus preventing freezing with a minimum energy consumption. REMINDER To completely shut unit off, ON/OFF switches must be placed in OFF position. UNITS WITH TIMER Clock setting The programme/timer, as in all clocks, must be set to the correct time. The timer is in effect an electric clock and only works while plug is connected to the power supply. Whenever the plug is disconnected, the timer stops and must be re-set. [. . . ] All De'Longhi electrical appliances are guaranteed free of all material and manufacturing defects. According to the terms of this Guarantee, our obligations are limited to replacement or repair free of charge at one of our authorised service centres of parts or assemblies with fabrication defects or damaged during transport to the shop of your choice. This De'Longhi product is designed and produced for domestic use only. Its use on commercial premises is not recommended and will invalidate the Guarantee. [. . . ]