User manual DELONGHI H 190510MEX1

[. . . ] GENERAL FEATURES Remove the appliance from the packaging, turn upside down and rest on the polystyrene. Check that neither the appliance nor the power cable has been damaged in any way during transportation. do not operate the appliance if damaged 2. [. . . ] A) Models with single switch (1 power level): button in position «I» = Total power on (indicator light on); button in position «O» = (indicator light off) b) Models with double switch (3 power levels) button in position «l» = minimum power (indicator light on); button in position «ll» = intermediate power (indicator light on); both buttons in position «l» «ll» = maximum power (indicator lights on) To turn appliance off, switch off both switches or remove plug from wall socket. Adjusting the thermostat When the room has reached the required temperature, slowly turn the thermostat until the indicator light goes off (or to the position marked by a click) and no further. The set temperature will then be regulated automatically and kept constant by the thermostat. Frost protection function With the thermostat in position and the switches pressed, the appliance maintains the room at a temperature of about 5°C, preventing freezing with minimum energy consumption. C) Models with a 24 hour time-clock (fig. Clockwise until the number 10 on the disk coincides with the pointer v on the timer. Set the periods of time when you want the appliance to work by pushing the teeth inwards. Each tooth corresponds to a period of 15 minutes. This will leave visible sectors which correspond to the periods of operation. When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket). - To change the programming, move the teeth back into the initial position and set the new periods of functioning. - If you want to make the appliance operate without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, as well as turning the switches off, you must also unplug it from the mains to avoid continued operation of the timer. D) Models with mechanical 12 hour timer (programming of delayed start). With this timer, you can set the hour you want the radiator to start operating automatically. - Rotate the timer knob clockwise until the pointer coincides with the number corresponding to the required hours. the appliance will begin to warm up after the set time has expired. TURBO HEATING Some models are fitted with a heating fan which heats the room more quickly. [. . . ] - When you start the radiator for the first time, leave it operating at maximum power for at least two hours. During this operation, ventilate the room well to eliminate the "new" smell emanating from the appliance. - It is normal for the appliance to emit a squeaking noise when turned on for the first time. [. . . ]