User manual DELONGHI HCO620

[. . . ] Wall mounting IMPORTANT: before drilling the wall, make sure the area is free of electrical wires or pipes. To fix your convector heater to the wall, use the brackets “D” and “E” provided and appropriate screws and anchors (not provided). Proceed as follows: • Fix the brackets “D”, making sure the distances are as shown in fig. € Hang the heater on the two brackets fixed to the wall. [. . . ] In spring or autumn or on mild days, you can save energy by using minimum power. Frost prevention mode With the thermostat dial in the position and one of the power levels selected, the appliance maintains room temperature at about 5°C, preventing freezing with minimal energy consumption. Models with fan A number of models have a fan for faster more even heating. To use this function, turn the power selector (A) to the Max position (the corresponding light comes on). Models with 24 hour timer (C) To set the heating periods proceed as follows: • Check the time on your clock or watch. 00 for example, turn the numbered programmer disk until the number 10 coincides with the pointer ▲ marked on the programmer. € Set the periods of time during which you want the appliance to operate by pushing the teeth towards the centre. Each tooth corresponds to a period of 15 min. At the end of this procedure, sectors corresponding to the operating periods can be seen. € In this way, the appliance will function automatically each day at the times set. (Important: the appliance must always be plugged into the socket) 6 • To modify programming, return the teeth to the initial position and set the new operating periods. € To use the appliance without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, turn the dial (A) to the “0” position and unplug from the mains to avoid the programmer operating uselessly. Maintenance Always unplug from the mains socket before cleaning. The convector heater requires no special maintenance. It is sufficient to remove dust with a soft dry cloth. WARNINGS Important: to avoid the safety system resetting accidentally, this appliance must not be powered through an external timer. € The first time you use the appliance, operate it for at least 15 minutes with the thermostat at maximum to eliminate the “new” smell. A little smoke due to the protective substances applied to the heating element before transport may be given off. € Do not use the convector heater near bath tubs, showers, sinks or swimming pools. [. . . ] At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. [. . . ]