User manual DELONGHI HS20F

[. . . ] With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. [. . . ] To turn this appliance off, rotate the knob to its lowest position and remove its plug from the electrical outlet. - Models with a thermostat and two switches Turn the thermostat knob clockwise until it reaches its last possible setting, then press one switch (minimum power) or both switches (maximum power) so the red area becomes visible (or the warning light comes on in those models so provided). Adjusting the thermostat When the room has reached the desired temperature, turn the thermostat knob slowly in an anti-clockwise direction until you get to the setting — and not beyond it — where you hear a click (or, for models with warning lights, until those lights turn off). The thermostat will then adjust that set temperature automatically and keep it constant. If your appliance is the type with 2 switches, you could utilize only one of them during mild seasons and on days not particularly cold. You will thus use but little electrical power and obtain even greater savings in energy consumption. Anti-freeze function (only for models with a thermostat) Turn the switch (or switches) to make the red area show, then turn the thermostat knob to the " " setting. When so regulated, this appliance will keep a room at a temperature of 5° C. while consuming but a minimum of energy. Model with a fan This version makes it possible to heat a room even more quickly, thanks to a built-in fan that speeds up the spread of heat and keeps the temperature uniform. To turn this unit on, proceed as follows: • Turn the thermostat knob clockwise to the last possible setting. € To operate the appliance at minimum without the fan, push the I button (the red area will become visible or, in models having a switch with a warning light, the light will come on). € To operate the appliance at minimum with the fan, press the II button (the red area will become visible or, in models having a switch with a warning light, the light will come on). € Push both switches in order to get the highest power In this model, the thermostat can be adjusted just as it is for models without a fan. MAINTENANCE Always pull the plug out of its electrical outlet before beginning any cleaning. This electric convector requires no special maintenance. [. . . ] We likewise recommend that you not place this equipment in a draft, because blasts of air may adversely affect the equipment's operational efficiency. Important: Never cover this appliance in any manner whatsoever while it is operating, because by doing so you will cause a dangerous increase in the temperature of the appliance itself. Termostatens indstilling udføres, for denne model, ligesom for dem uden termostat. [. . . ]