User manual DELONGHI HVS

[. . . ] With alternative plugs not incorporating a fuse, the circuit must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug. [. . . ] Setting the thermostat Position the thermostat on maximum. When the room has reached the required temperature, turn the thermostat lever slowly clockwise until you hear a click and the fan goes off The thermostat will then keep room temperature at the selected level automatically. Frost prevention mode With the function selector in position 3 and the thermostat lever in position , the appliance maintains room temperature at about 5°C, preventing freezing with minimal energy consumption. MAINTENANCE - Always unplug from the mains socket before cleaning. - Clean the air intake and outlet grilles regularly. - Do not use abrasive products or solvents to clean the appliance. IMPORTANT - The appliance is designed and produced for domestic use only. - Do not use this appliance near showers, baths, swimming pools, etc. - Always use the heater in an upright position. - Do not cover the appliance when in operation to avoid the risk of fire. Never obstruct the intake and outlet grilles (danger of overheating). - The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children must be supervised to ensure they do not play with the appliance. - The heater must be positioned at least 50 cm from furniture, walls, curtains, or other objects. 6 - - The appliance must not be placed near walls, furniture, curtains etc. The use of extension leads is not recommended. However if they cannot be avoided, follow the instructions accompanying the extension lead and never exceed the power limit marked on the extension. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent in order to avoid a hazard. [. . . ] IMPORTANTImportant information for correct disposal of the product in accordance with EC Directive 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. [. . . ]