User manual DELONGHI KBO 3001

[. . . ] Children should be supervised to ensure that they do not play with the appliance. · Remove the plug from the mains socket when not in use and before cleaning. Allow the kettle to cool before cleaning. · Remove the kettle from its power base before filling. [. . . ] Only 13amp replacement fuses which are asta approved to B. S. 1362 should be fitted. This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference. 4 Kettle KBO3001 Using for the first time · Before use, check that the appliance has not been damaged during transport. · Remove all packaging from the kettle and power base. · Remove any labels from the outer surfaces except the rating label. 2) (refer to page 5 "Removing the scale filter"). · Fill the kettle to the max level and boil. · The boiled water should be discarded and the kettle rinsed out with cold water. This procedure should be carried out twice to remove any manufacturing dust, etc. · After the kettle has been rinsed out, refit the filter (fig. 3). c a Fig. 1 b Using the kettle With the specially designed power base and central connector, you can now set the kettle on the base at any angle, from any position. · Release cord from storage base and adjust length by winding around the base to give the correct cord length to reach the plug socket to be used (fig. · Do not leave loose cord hanging over the edge of work surfaces. Fig. 2 1 2 Fig. 3 CORD EXIT Filling · Remove the kettle from the base unit before filling. · Remove the lid and fill the kettle to the desired level. Do not fill with less than 0, 3 litre of water (min level) to prevent the kettle running dry while in use; misuse of this kind will shorten the life of the element. Do not fill with more than 1, 7 litres of water (max. If the kettle is overfilled, there is a risk that boiling water may overflow and cause burns. · To close the lid, push it onto the kettle body until it clicks firmly into place. · The water level indicator enables you to see the quantity of water in the kettle. Fig. 4 5 Kettle KBO3001 Switching on Plug the power base into the mains socket. Press the ON/OFF switch down (fig. 5) to switch the kettle on. The power-on indicator lights will illuminate. The kettle will automatically switch off once the water is boiled (the ON/OFF switch will click upwards and the lights will switch off ). · To turn the kettle off before the water boils, you may move the ON/OFF switch up to the OFF position, or simply lift the kettle from its base - it will switch off and the switch will return to the OFF position automatically. [. . . ] Failure to descale your kettle may invalidate your guarantee. · It is recommended to use specific (store bought) products for descaling of kettles. · When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. After descaling, boil with fresh water several times and discard. [. . . ]