User manual DELONGHI KH770715

[. . . ] Check that neither the appliance nor the power cable has been damaged in any way during transportation. Do not operate the appliance if damaged 2. FITTING THE FEET Remove the feet and the castors from the polystyrene packing. Fit the castors to the spindles on the feet and push firmly until they click into position (fig. [. . . ] 8) To programme heating, proceed as follows: - Look at the time on your clock or watch. 00, turn the numbered timer disk clockwise until the number 10 on the disk coincides with the pointer ▲ on the timer. Set the periods of time when you want the appliance to work by pushing the teeth inwards. Each tooth corresponds to a period of 15 minutes. This will leave visible sectors which correspond to the periods of operation. When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket). - To change the programming, move the teeth back into the initial position and set the new periods of functioning. - If you want to make the appliance operate without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, as well as turning the switches off, you must also unplug it from the mains to avoid continued operation of the timer. TURBO HEATING Some models are fitted with a heating fan which heats the room more quickly. To turn this function on, push the button into the position. Important: a safety device cuts in and switches off the appliance if it overheats due to an accumulation of dust on the air intake and output grills. To restart it, unplug from the mains and leave the appliance to cool down. Clean the air intake and output grills with a vacuum cleaner, then replug into the mains and turn on again. MAINTENANCE Before carrying out any operation on the radiator, unplug from the electric mains and wait for it to cool. the oil-filled electric radiator requires no particular maintenance. It is sufficient to remove the dust with a soft, dry cloth. never use abrasive powders or solvents. If necessary remove concentrations of dirt using a vacuum cleaner. IMPORTANT IMPORTANT: Never under any circumstances cover the appliance during operation as this would lead to dangerous overheating. [. . . ] Do not use the appliance in rooms with a base area of less than 4 m2. I dette tilfælde slukkes apparatet fuldstændigt ved at slukke for kontakterne og trække stikket ud af stikkontakten for at undgå, at programmeringsanordningen bliver ved med at fungere formålsløst TURBOOPVARMNING Nogle modeller er forsynede med termoventilation, som hurtigere opvarmer rummet. - Hvis forsyningskablet er beskadiget, skal det udskiftes af producenten eller dennes Serviceassistance eller under alle omstændigheder af en person med tilsvarende kvalifikation for at undgå enhver form for risiko. - - Når apparatet tages i brug første gang , skal man lade det fungere ved maksimal styrke i mindst 2 timer. [. . . ]