User manual DELONGHI KR 1000P

[. . . ] The manufacturer cannot be held responsible for any damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unqualified personnel. - Make sure the hands, hair, clothing and kitchen utensils are clear of the container before starting the appliance. The blades may cut: handle them with care. Special attention must be paid to the following fundamental safety standards: - Never touch the appliance with damp or wet hands. [. . . ] Turn the appliance off before changing accessories. Avoid contact with moving parts while the appliance Insert one of the following cutters onto the motor shaft "A4" according to your requirements (fig. Dough hook (for kneading) Whisk accessory (for whisking cream, egg white, etc) · Before turning the appliance on, make sure the cutters are positioned correctly. Put the ingredients to be prepared into the bowl "B3". Place the cover "B2" on the bowl and rotate anticlockwise until it locks into place (fig. Start the appliance by turning the ON/OFF + speed regulator knob "A5" to one of the positions available. After processing, the cutters, mixer accessory or whisk must be removed from the bowl "B3" before the ingredients. At the end of processing, always replace the universal cutter "D1" and double cutter "D2" (model KR750/1000 only) in their respective guards "D3". To push the food to be processed through the hole in the cover, use the feeder provided only. When the appliance is in operation, you are recommended to position the feeders on the feed hole. Never leave the appliance unattended while in operation. Note: when preparing bread, use a maximum of 500g of flour with 300g of water. operate the appliance for 40 seconds (pos. MAX/2, depending on the model) then leave to rest for one minute (0) for a maximum of two cycles; then leave the appliance to cool down. These cutters can be used to slice, chop and grate various types of vegetables, potatoes and fruit. Before removing or fitting any accessory, always make sure the appliance is unplugged from the mains and that the ON/OFF knob "A5" is in the OFF position. Make sure the safety cover "A1" is closed. After choosing one of the slicer or grater cutters "E", fit it on the cutter holder disk "E1" (fig. Fit the cutter holder disk "E1" onto the motor shaft "A4" (fig. Place the cover "B2" on the container and rotate anticlockwise until it locks into place (fig. Always use the feeder "B1" to push the food down. Never use the fingers or other objects to push the ingredients into the bowl! [. . . ] Note: process a maximum of 700 g of carrots with 1050 of water, operate the appliance for 20 seconds (pos. mAX/2 , depending on the model) , then leave to rest for one minute (pos. 0) for a maximum of three cycles; then leave the appliance to cool down. In model KR650, when the cutters are not in use, they can be stored in the handy cutter storage compartment (fig. [. . . ]