User manual DELONGHI PAC A 85

[. . . ] GB IMPORTANT SAFEGUARDS · Use this appliance only as described in this instruction manual. As with all electrical equipment, whilst the instructions aim to cover as many eventualities as possible, caution and common sense should be applied when operating and installing this appliance. · This appliance is designed for home air conditioning and must not be used for other purposes · It is dangerous to modify or alter the characteristics of the appliance in any way. · The appliance must be installed in conformity with national legislation regulating electrical equipment and installations. [. . . ] (MED) reduces noise levels but still maintains a good level of comfort. (LOW) for silent operation AUTO: the appliance automatically selects the most suitable fan speed in relation to the temperature set on the digital display (the graphics on the display move). The most suitable temperature for the room during the summer varies from 24 to 27°C. You are recommended, however, not to set a temperature much below the outdoor temperature. DEHUMIDIFYING MODE Ideal for reducing the humidity in a room without lowering or raising the temperature (spring or autumn, damp rooms, rainy spells, etc). In dehumidifying mode, the appliance selects fan speed automatically. FUNZIONE VENTILAZIONE Adjust fan speed by pressing the FAN button (P). The fan speed selected will be displayed (HIGH, MED, LOW). In this mode, AUTO cannot be selected. 25 SETTING THE TIMER The timer can be used to delay appliance start up or shut down. This avoids wasting electricity by optimising operating periods How to programme delayed start up · Plug the appliance into a mains socket and press the ON/STAND-BY button (A), then select the required operating mode and other settings (temperature, fan speed, etc). · Press the ON/STAND-BY button (A) again. The appliance switches to stand-by mode. · Press the TIMER button (H): the last timer setting or the preset value 6. 0 h flashes on the display. · Use the + (G) or - (I) buttons to set the number of hours delay before the appliance comes on. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the "+" (G) or "-" (I) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. If the setting is not confirmed within a few seconds, the display resets to stand-by. With the timer activated, the countdown before the programmed start up time is displayed. To cancel the timer programme, press the timer button (H). How to programme delayed shutdown · Delayed shutdown can be set with the appliance in any operating mode - air conditioning/dehumidifying/fan. · Press the Timer button (H) the last timer setting or the preset value 6 . · Use the + (G) or - (I) button to set the number of hours delay before the appliance goes off. [. . . ] · Press the TIMER button again to confirm the start-up time. A beep sounds and the time set is also displayed on the control panel, confirming setting of the timer. A countdown of the time left is displayed on both displays. · At the end of the set time the appliance switches on automatically, with the settings made previously. [. . . ]