User manual DELONGHI PAC CT 90

[. . . ] Important safeguards · Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many situations as possible. Caution and common sense should be used when operating and installing this air conditioner. · This appliance has been manufactured to cool and dehumidify domestic environments and must not be used for other purposes. [. . . ] - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. · This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 10 Using the remote control TURNING THE APPLIANCE ON Plug into the outlet. Press the ON/STAND-BY button (17) (when turned on, the air conditioner starts operating in the same mode as when it was turned off). Press the MODE button (18) to select the required mode: AIR CONDITIONING ( ) DEHUMIDIFYING ( ) FAN ONLY ( ) An arrow on the display indicates the selected mode. GB AIR CONDITIONING MODE ( ) Ideal for hot humid weather when you need to cool and dehumidify the room. In air conditioning mode, use the buttons to select the desired temperature. To change the fan speed, use the fan button (16) on the remote control, choosing from the available speeds: the appliance automatically selects the most suitable fan speed in relation to the temperature set on the digital display and current room temperature. the air conditioner operates at maximum to reach the required temperature as rapidly as possible. reduces noise levels while maintaining a comfortable temperature. for silent operation and maximum energy efficiency. Two arrows on the display indicate respectively air-conditioning and the fan speed. The most suitable temperature for the room during the summer varies from 24 to 27°C. You are recommended, however, not to set a temperature much below the outdoor temperature. DEHUMIDIFYING MODE ( ) Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc). In dehumidifying mode, the appliance selects fan speed automatically. Two arrows on the remote control display indicate and respectively. FAN MODE ONLY ( ) In fan mode, fan speed can be set by pressing the fan button (16). The fan speed changes between the speeds available (LOW/MED/HIGH). Two arrows on the display indicate the fan mode and the speed set. In this mode, the auto speed cannot be selected. SETTING THE TIMER The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by not operating the appliance when it is not needed. How to program delayed shutdown · With the air conditioning unit on, press the timer button (19). The time is displayed and the "h" symbol flashes, with a flashing arrow indicating timer shut-down . · Set the time when you want the appliance to go off using the buttons (from 30 minutes to 24 hours). [. . . ] Without allowing the unit this time (6-24 hours) The unit may function for only a short time, and then the compressor will break down from lack of oil). This appliance is equipped with a 3 prong grounded plug. The plug must be connected into an outlet that is properly installed and grounded in the accordance with all local codes and ordinances. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician or relocate the unit to a proper outlet. [. . . ]