User manual DELONGHI PACA 140E

[. . . ] Important Safeguards · Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many situations as possible. Caution and common sense should be used when operating and installing this air conditioner. · This appliance has been manufactured to cool and dehumidify domestic environments and must not be used for other purposes. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the customer service call center or an experienced radio/TV technician for help. The following section describes the ADDITIONAL FUNCTIONS corresponding to the controls on the bottom part of the remote control. BOOST FUNCTION Ideal for the summer to cool rooms rapidly. To set this mode: · Press the button. The appliance operates in air conditioning mode at maximum fan speed. While this function is selected, it is not possible to set the temperature or change fan speed. 11 Using the remote control SLEEP FUNCTION This function is ideal for the night as it gradually reduces operation of the appliance. To set this function: · Select the operating mode (air conditioning, dehumidifying or smart) as described above. The appliance operates in the previously selected mode with low fan speed. The SLEEP function maintains the room at optimum temperature without excessive fluctuations in either temperature or humidity and with silent operation. Fan speed is always at low speed, while room temperature and humidity vary gradually to ensure the most comfortable conditions. During air conditioning, the temperature increases by 2°F (1°C) after 60 minutes and 4°F (2°C) after 2 hours. SELECTING THE TEMPERATURE SCALE Press the button to switch the temperature scale from Centigrade to Fahrenheit and vice-versa. PROGRAMMING THE TIMER The appliance can be programmed to start up and shut down when desired. Programming start up · Press the button. The start-up time and message ( ) flashes on the remote control display. · Press the or buttons to set the time you want the appliance to start up. · When that time is reached, press the OK button to confirm. The message ( ) appears on the remote control display and the symbol is displayed on the appliance to indicate that the timer is active. 12 Self-diagnosis Programming shutdown · Press the button. The shutdown time and message ( ) flash on the remote control display. · Press the or buttons to set the time you want the appliance to shut down. · When that time is reached, press the OK button to confirm. The message ( ) appears on the remote control display and the symbol is displayed on the appliance to indicate that the timer is active. SELF-DIAGNOSIS The appliance has a self diagnosis system to identify a number of malfunctions. [. . . ] Without allowing the unit this time (6-24 hours) The unit may function for only a short time, and then the compressor will break down from lack of oil). This appliance is equipped with a 3 prong grounded plug. The plug must be connected into an outlet that is properly installed and grounded in the accordance with all local codes and ordinances. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician or relocate the unit to a proper outlet. [. . . ]