User manual DELONGHI PACS 1100 F

[. . . ] Warnings · This appliance is designed for home air conditioning and must not be used for other purposes. · It is dangerous to modify or alter the characteristics of the appliance in any way. · The appliance must be installed in conformity with legislation in force in the country concerned. · If the appliance requires repair, contact a Service Centre authorised by the manufacturer only. [. . . ] 8 21 ENGLISH Buttons and indicators on the indoor unit BUTTONS AND INDICATORS ON THE INDOOR UNIT MANUAL OPERATION BUTTON RED LIGHT YELLOW LIGHT GREEN LIGHT SIGNAL RECEIVER INDICATOR LIGHTS These turn on according to the function selected or indicate any operating anomalies. FUNCTION OFF AIR-CONDITIONING DEHUMIDIFYING FAN RED LIGHT on - YELLOW LIGHT on GREEN LIGHT on on - ANOMALY ALARM RED LIGHT flashing YELLOW LIGHT flashing GREEN LIGHT flashing see "troubleshooting" on page 30????????? MANUAL OPERATION This operating mode is to be used only when the remote control is inoperative (broken, lost, flat batteries). Press the manual operation button until selecting the desired function (air-conditioning, dehumidifying, fan, smart, off). Refer to the indicator lights and the table above to identify the mode selected. For each mode selected, the appliance will automatically choose the optimum values for maximum comfort. This appliance is fitted with a safety system that prevents the compressor from starting until at least 3 minutes have elapsed since last started. 22 The remote control REMOTE CONTROL Inserting the batteries · Slide the cover as shown in figure. · Insert two new batteries (not rechargeable) making sure the (+) and (-) are in the correct positions. Note: WE SUGGEST USING ALKALINE BATTERIES (LR03). If the remote control is to be replaced or thrown away, the batteries must be removed and disposed of in accordance with the current laws as it represents an environmental hazard. 2 PROPER USE · · Point the remote control unit towards the airconditioning unit signal receiver. Maximum distance: about seven (7) metres (without any obstacle between remote control and receiver). The remote control must be handled with great care: do not drop it, expose it to direct sunlight, or leave it close to heat sources. · 23 ENGLISH 1 Description of the remote control THE REMOTE CONTROL A. MODE button Selects the operating mode (air conditioning, dehumidifying, fan). ROOM TEMPERATURE buttons Set room temperature or programme the timer. FAN button Sets fan speed to automatic, high, medium or low in sequence. SWING button ((not enabled on this model) E. SLEEP button ( ) Sets or cancels the automatic SLEEP function. SMART button ( ) When this button is pressed, the appliance automatically establishes the most suitable operating mode for maximum comfort. ) (not enabled on this I H G F SWING FAN A B B E D C DISPLAY Signal transmission Air conditioning indicator Dehumidifying indicator Fan indicator SUPER indicator (not enabled on this model) SMART indicator SLEEP indicator Automatic fan speed High fan speed Medium fan speed Low fan speed Regulates temperature in SMART or Dehumidifying mode. Low High ON/OFF button Press this button to turn the appliance on and off. NB: the settings are displayed even when the air conditioner is off 24 Functions AIR-CONDITIONING MODE Press the button to turn the appliance on. A beep indicates that the air-conditioning unit is on and the symbol flashes on the display · Press the MODE button a number of times until the air-conditioning symbol appears on the display. · Now set the temperature using the buttons. · To select fan speed, press the FAN button repeatedly until the required fan speed is selected (automatic, high, medium, low). NB: in air-conditioning mode, the appliance automatically removes excess moisture from the atmosphere. [. . . ] Cover the appliance with a plastic bag to stop it being covered in dust. CLEANING THE AIR FILTERS To keep your air conditioning unit working efficiently, you should: Clean the dust filter every week The filters are fitted on the two intake grilles on the indoor unit. To clean the filters, proceed as follows Remove the dust filters from the intake grilles (Fig. 11 Use a vacuum cleaner to remove the dust collected on the dust filter. If they are very dirty, immerse in warm water and rinse a number of times. [. . . ]