User manual DELONGHI PACS 120HP

[. . . ] Warnings · This appliance is designed for home air conditioning and must not be used for other purposes. · It is dangerous to modify or alter the characteristics of the appliance in any way. · The appliance must be installed in conformity with legislation in force in the country concerned. · If the appliance requires repair, contact a Service Centre authorised by the manufacturer only. [. . . ] This can then be connected to a rubber hose Note: If appropriate, the external unit can be protected with the protective cover 22 fixing it with the screw provided. The outdoor unit should be protected from the sun, rain, snow and drips from the roof. POSITIONING THE OUTDOOR UNIT The outdoor unit can be placed on a terrace or balcony (Fig. 12 The outdoor unit can also be installed on a window sill, if this faces onto a balcony (Fig. 14 Always lock the 2 outer wheels using the castor locks supplied. The manufacturer is not liable for any damage to people or things caused by the positioning of the unit in a manner not compliant with the basic standards of safety. 23 ENGLISH Buttons and indicators on the indoor unit BUTTONS AND INDICATORS ON THE INDOOR UNIT MANUAL OPERATION BUTTON RED LIGHT YELLOW LIGHT GREEN LIGHT PUMP BUTTON SIGNAL RECEIVER OF THE REMOTE CONTROL INDICATOR LIGHTS These turn on according to the function selected or indicate any operating anomalies. FUNCTION OFF AIR-CONDITIONING DEHUMIDIFYING FAN HEATING RED LIGHT on on YELLOW LIGHT on - GREEN LIGHT on on - ANOMALY ALARM RED LIGHT flashing YELLOW LIGHT flashing GREEN LIGHT flashing see "troubleshooting" on page 32 MANUAL OPERATION This operating mode is to be used only when the remote control is inoperative (broken, lost, flat batteries). Press the manual operation button until selecting the desired function (air-conditioning, dehumidifying, fan, heating, smart, off). Refer to the indicator lights and the table above to identify the mode selected. For each mode selected, the appliance will automatically choose the optimum values for maximum comfort. This appliance is fitted with a safety system that prevents the compressor from starting until at least 3 minutes have elapsed since it last went off. 24 The remote control THE REMOTE CONTROL Inserting the batteries · Remove the protective cover (see figure). · Insert two new batteries (not rechargeable) making sure the (+) and (-) are in the correct positions. NB: Alkaline batteries should be used (LR03). 1 2 When replacing or disposing of the remote control, the batteries must be removed and disposed of according to the legislation in force, being harmful to the environment. Warning: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. If the remote control is not be used for a certain length of time, remove the batteries. CORRECT USE · Aim the remote control at the signal receiver on the air-conditioner. · Maximum distance: around 7 metres (without obstacles between the remote control and the receiver). · The remote control should be handled with extreme care and respect: without dropping it, without exposing it to direct sunlight or near sources of heat. 25 ENGLISH Description of the remote control THE REMOTE CONTROL A. MODE button Selects the operating mode (air conditioning, dehumidifying, fan and heating). Buttons for SETTING THE ROOM TEMPERATURE Set room temperature or program the timer. FAN button Sets fan speed to automatic, high, medium or low in sequence. SWING button (not enabled on this model) E. SLEEP button ( ) Sets or cancels the automatic SLEEP function. SMART button ( ) When this button is pressed, the appliance automatically establishes the most suitaHigh ble operating mode for maximum comfort. Low H. SUPER button ( I H G F SWING FAN A B B E D C THE DISPLAY Signal transmission Air-conditioning indicator Dehumidifying indicator Fan indicator Heating indicator SUPER indicator SMART indicator SLEEP indicator High Automatic fan speed Low High ) Starts or stops rapid cooling (in the rapid High cooling mode, the fan operates at high speed with the temperature automatically set to Low 18°C). [. . . ] You will hear a beep. 29 ENGLISH Tips ELECTRICAL CONNECTIONS Before plugging the appliance into the mains socket, check that: · the mains power supply corresponds to the value indicated on the rating plate on the rear of the appliance; · the mains socket and electrical circuit are adequate for the load; · the mains socket matches the plug. If this is not the case, have the plug replaced; · the mains socket is adequately earthed. Failure to follow these important safety instructions absolves the manufacturer of all liability. · Protect the room from direct exposure to the sun by partially closing curtains and/or blinds; ONE LAST LOOK AT THE ROOM To get the best from your air conditioning unit, follow these recommendations: · close the windows and doors in the room to be air conditioned. [. . . ]