User manual DELONGHI PACT 110P

[. . . ] PAC T100P / T110P PORTABLE AIR-CONDITIONER CONDITIONNEUR D'AIR PORTATIF SISTEMA DE AIRE ACONDICIONADO PORTÁTIL CONDIZIONATORE D'ARIA Register this product on-line and receive a free trial issue of Cook's Illustrated. Only) Visit www. delonghi-registration. com. Visit www. delonghi. com for a list of service centers near you. and Canada Only) Enregistrez ce produit en ligne et recevez un numéro gratuit de Cook's Illustrated. [. . . ] Contact your local government to find out if they have a battery recycling program or how to dispose of used batteries. Warning: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not dispose of batteries in fire: batteries may explode or leak. If the remote control is not be used for a certain length of time, remove the batteries. 1 2 CORRECT USE · Aim the remote control at the signal receiver on the air-conditioner. · Maximum distance: around 23 ft. (7 meters) (without obstacles between the remote control and the receiver). · The remote control should be handled with extreme care: without dropping it, without exposing it to direct sunlight or near sources of heat. 11 Description of the remote control THE REMOTE CONTROL A. MODE button Selects the operating mode (air conditioning, dehumidification, air filtration, Smart). Buttons for SETTING THE ROOM TEMPERATURE Set room temperature or program the timer. SPEED button Sets fan speed to automatic, high, medium or low in sequence. SWING button Activates the motorized lowers. SLEEP button ( ) Sets or cancels the automatic SLEEP function. SMART button ( ) When this button is pressed, the appliance automatically establishes the most suitable operating mode for maximum comfort. BOOST button ( ) Starts or stops rapid cooling. In the rapid cooling mode, the fan operates at high speed with the temperature automatically set to 64°F (18°C). ON/STAND BY button Press this button to turn the appliance on and in stand by. Note: the settings are displayed even when the air conditioner is in stand by. %RH I H G F SWING SPEED BOO ST A B B THE DISPLAY E D C Signal transmission Air-conditioning indicator Dehumidifying indicator Air filtration indicator BOOST indicator SMART indicator SLEEP indicator Automatic fan speed High fan speed Medium fan speed Low fan speed Used to set the temperature in SMART mode (see page 14 for further information) 12 Remote control functions AIR-CONDITIONING MODE · Press the button (I) to turn the appliance on. · The symbol flashes on the display and a "beep" indicates that the air-conditioning unit is on. · Press the MODE button (A) a number of times until the air-conditioning symbol appears on the display. · Now set the temperature using the buttons. · To select fan speed, press the SPEED button (C) repeatedly until the required fan speed is selected (automatic, high, medium, low). [. . . ] Clean the filters and dry thoroughly before putting them back. M 17 Technical specification TECHNICAL SPECIFICATION LIMIT CONDITIONS Room temperature range of the air-conditioned space 64-95°F (18 - 35°C) Power supply voltage Max. power input during air conditioning Refrigerant Cooling capacity see rating plate " " " Appliance dimensions: · width 18. 6 " · height 36. 8 " · depth 16. 1 " · weight 75 Lbs 495 940 410 34 mm mm mm kg Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by a technical service center appointed by the manufacturer only. The appliance should be disposed of by a specialist center appointed by the manufacturer only. NEVER TURN THE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS OCCURS, WAIT AT LEAST 8 HOURS BEFORE TURNING THE APPLIANCE ON. SAFETY PLUG The appliance is fitted with a safety plug to protect the power cable. [. . . ]