User manual DELONGHI PINGUINO CS600ECO

[. . . ] GB-5750004200 11-02-2004 9:12 Pagina 16 Carefully read this instructions booklet before installing or using this appliance. Only by doing so will you have the best results and enjoy the greatest safety when using the appliance. Please pay particular attention to the warnings on page 28. INTRODUCTION This is a conditioner of the air-to-air type composed of two units: one internal (which operates inside the room) and the other external (to be installed outside). These two units are joined together by a sheathing (of about 3 m. ) containing the refrigerant pipes, electrical power cables and condensation-discharge tube. TECHNICAL FEATURES Power supply voltage Cooling capacity* Max. [. . . ] Maximum distance: about seven (7) metres (without any obstacle between remote control and receiver). Press the button to turn the appliance on. A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. Press the MODE button a number of times until the dehumidifying symbol appears on the display. Use the buttons to set the required level of dehumidifying. The symbol is displayed High · · . High Low Low · · Press the button to increase the dehumidifying level and the button to reduce it. In dehumidifying mode, fan speed is selected by the appliance automatically. FAN MODE On humid but not particularly hot days, the fan function alone may be adequate. A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. · Press the MODE button a number of times until the fan symbol appears on the display. · Once fan mode has been selected, press the FAN button until the required speed is reached (low, medium, high). 25 GB-5750004200 11-02-2004 9:12 Pagina 26 SMART MODE In SMART mode, the air-conditioning unit decides the best way to operate to guarantee maximum comfort. · Press the button to turn the appliance on. A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. The appliance functions automatically and the symbol appears on the display. NB: in SMART mode, temperature is controlled automatically. However, if the required temperature has not yet been reached, it can be reduced or increased by a maximum of 2° C by pressing the buttons. It should be pointed out that when the automatic ventilation functions are activated, the appliance itself will choose the proper speed. High Low AUTOMATIC SLEEP MODE The automatic SLEEP mode is ideal for the night-time as it enables operation of the air-conditioning unit in any of the modes (air-conditioning, dehumidifying, fan or SMART) to be gradually reduced until it shuts down completely (after eight hours). To select SLEEP mode, proceed as follows: · Press the button to turn the appliance on. · A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. · Press the MODE button a number of times until the symbol of the function required appears on the display. · Then select the required temperature by pressing the buttons. · Now press the SLEEP button to set the night function. Press the SLEEP button again to go back to the previous mode. [. . . ] This appliance must be connected to an efficient "earthing" system. Have your electrical system checked out by a qualified electrician. Avoid using extension cords for the electric feed cable. Before any cleaning or maintenance, always pull the plug from its electric outlet. [. . . ]