User manual DELONGHI PINGUINO FX160

[. . . ] FX160/400ECO I 24-06-2004 12:11 Pagina 1 FX160 / 400 ECO Istruzioni per l'uso . Mode d'emploi et d'entretien . . pag. 6 21 36 51 66 81 96 >~ <~ η <~ . 111 FX160/400ECO I 24-06-2004 12:11 Pagina 2 Genti le Cliente, La ringraziamo per aver scelto un prodotto De'Longhi, il leader mondiale nella costruzione dei climatizzatori portatili. [. . . ] Check the refrigerant connections for leakage by covering the joints with some soapy water. Attention We recommend that disconnection and reconnection of the quick couplings be carried out by qualified personnel. PREPARING THE EXTERNAL UNIT The external unit can be placed on a terrace or balcony. In this case the brackets should not be used. (Mod. FX400ECO) 3) Attach the external unit to the brackets, fixing it with the M6 screws. (17) 2 14 1 Alternatively, for temporary installation, the external unit can be suspended as shown in fig. In this case, use the belts (14) supplied; hook these to the eyes (15); before inserting the eyes, remove the rubber seals. 15 11 The external unit can also be hung on a wall using the brackets (12). Proceed as follows: 1) FFix the bracket to the wall 12 taking care to position it as indicated in fig. On the display two lines will appear indicating Stand-by mode Press the ON/OFF button (A) and then the MODE button until the relevant function indicator appears viz. : Indicator C Indicator D Indicator E : air-conditioning : dehumidifying : purification/ventilation AIR-CONDITIONING FUNCTION This function is ideal in hot, humid weather conditions when the atmosphere requires to be cooled and dehumidified. To ensure proper function of the appliance, after selecting the air-conditioning function, press buttons + (F) or (G) until the desired temperature appears on the display. The temperatures most suited to the atmosphere in summer vary between 24 and 27C. We do not advise selection of temperatures much lower than those outside. Select fan speed by pressing the "FAN" button (Q) until the fan speed indicator appears: MAX (P): if you want the maximum power of the air-conditioner to reach the desired temperature as quickly as possible. MIN (O): if you want to reduce the level of noise and still maintain a good level of comfort. SILENT (N): when minimum noise is required, AUTO (M):if you prefer the appliance to select the fan speed for the temperature selected on the display panel. 25 DEHUMIDIFYING FUNCTION This function is ideal for reducing humidity in the atmosphere while avoiding increases or decreases in temperature (in between seasons, damp places, wet spells of weather). When you select the dehumidifying function, the letters " " will appear on the display. Model FX160ECO: the water is collected in the tank at the rear of the appliance. When the tank is full, the appliance will stop working and the display will show the letters " " (Full Tank); the tank must then be emptied. When it is re-inserted, the appliance will re-start automatically. FX400ECO: l'acqua viene in parte smaltita per evaporazione sull'unit esterna; consigliabile comunque provvedere a predisporre l'unit esterna con il raccordo di drenaggio, come indicato in fig. Una volta selezionata la funzione Deumidificazione, non possibile cambiare la velocit della ventilazione, ma l'apparecchio sceglie automaticamente la modalit di ventilazione. 29 ENGLISH FX160/400ECO GB 24-06-2004 11:55 Pagina 30 Operation Once the dehumidifying function has been selected, the fan speed cannot be changed. The appliance will automatically select the correct fan mode. [. . . ] The installation instructions should be observed meticulously. END OF SEASON OPERATIONS Empty the water from the tank. FX160ECO: Remove the tank (9) and empty it. To drain any residual water from the internal circuit, remove the stopper (11) from the drain tube (10) and drain completely. [. . . ]