User manual DELONGHI PINGUINO PAC 10

[. . . ] The use of accessories or spare parts other than those recommended by the manufacturer may result in fire, electric shock or personal injury. Do not use the appliance in ways other than that for which it was intended. Do not place the power cord under strain. Ensure that the outlet of the discharge hose is kept free from debris and blockages. [. . . ] Before plugging the unit into the socket, check that: · the main electric voltage corresponds to the value indicated on the rating plate on the back of the unit; · The socket and power cord 10 are adequate for the voltage required; · Failure to observe this safety regulation absolves the manufacturer from all liability. If you want to use the timer, turn the switch to the intermediate position . As with all clocks, the programmer/timer must be set to the right time. The timer is an electric clock and only works while the unit is connected to the outlet. When it is unplugged or there is no electricity, the timer stops (the clock is "slow") and must be re-set. 1) Set the times when the unit will function by pushing the notches in the required interval towards the outside (each notch represents 15 minutes). 2) Check that the timer indicates the exact time (see setting the time). 3) Choose the required function according to the instructions on the following page. When the timer's on the "0" (POWER OFF) position, the appliance doesn't work. In this mode, the unit will repeat the set program every day. Turning on and programming the unit With the unit turned off, the function selector 11 is in the "O" position. To turn the unit on in air conditioning mode, proceed as follows: 1. rotate the function selector knob clockwise: · Place the large crystal symbol in line with the reference mark to operate the unit in air conditioning mode at maximum fan speed. ⷠPlace the small crystal symbol in line with the reference mark to operate the unit in air conditioning mode at minimum fan speed. Now set the required temperature by rotating the room thermostat knob. Position the appliance in the room without inserting the tube; in this way the dehumidified air will exhaust directly into the room. In the dehumidifying mode, air colder than the room temperature will exhaust from the air exhaust grill. Conversely, air warmer than room temperature will be exhausted from the coupling 4 on the back side of the appliance. We therefore recommend rotating the room thermostat knob 15 to the maximum cool position. When room temperature has reached the required level, rotate the thermostat knob slowly clockwise until the thermostat is activated, turning the unit off. This programs the unit to the precise level of comfort required which will then be automatically maintained by the thermostat with considerable energy savings. When regulating the thermostat, the air conditioning function is temporarily interrupted and the unit continues to operate in fan only mode. [. . . ] Our obligation under this warranty is to provide one year parts and labor free from purchase date, with an additional four (4) years on any part of the sealed system consisting of the compressor, evaporator, condenser and factory connected refrigerant tubing. This warranty shall apply only if the AIR-CONDITIONER is used in accordance with the factory directions which accompany it, and on Alternatign Current (AC) circuit. This warranty is in lieu of all other warranties and representations, expressed or implied, and all other obligations or liabilities on our part. We do not authorize any other person or company to assume for us any liability in connection with the sale or use of our AIR-CONDITIONER. [. . . ]